Results 1 to 8 of 8
  1. #1
    BEGINNER
    Date Of Registration
    Nov 2012
    Messages
    28

    Scania 530cv no torque in the lower

    I have a problem on this scania 530cv year 96 has a pair in the bottom opens to 1800giri

  2. #2
    THE ACTIVE USER
    Date Of Registration
    Mar 2013
    The resort
    Palermo, sicily
    Messages
    1,128
    check if the turbine pushes and the state of the intercooler

  3. #3
    THE ACTIVE USER L'avatar di munro
    Date Of Registration
    Oct 2012
    The resort
    EARTH
    Messages
    1,207
    I would first check the filters..
    then check the power supply line of the fuel from the tank to the pump and that there are no "aspirations of the air"...
    if everything ? ok in that sense controls the pressure of the fuel inside the pump...
    many times the return valve diesel stara leaving to drain fuel pressure and...
    then the pump remains "really thin" diesel...
    if even after these controls, the defect remains you have to look at LDA on the pump and check the pressure turbo...

    do not forget that if after all these checks the defect remains...the only thing left to check are the fuel injectors....
    maybe they are off by as much damage and less diesel fuel needed...
    Last edited by msport (exil77grande); 21-08-2013 at 09:35
    A rider does not create queues even in the car...
    a automoblista create queues even on a motorcycle...

  4. #4
    THE AVERAGE USER L'avatar di robby51039
    Date Of Registration
    Dec 2012
    The resort
    quarrata (PT)
    Messages
    163
    first check the membrane lda off the tube sullapompa and with a fitting and a piece of pipe put type "vacuum"
    if it was broken this the feeling of driving a truck aspirated

  5. #5
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    55
    replace the sensor of the turbo on the manifold, and you'll see that the vehicle system, the 144 530 has a pump in the line controlled by a control unit with regard to advances, position rod rack-and-pressure turbo
    trusted replace the sensor and it will go? as before

  6. #6
    Banned
    Date Of Registration
    Feb 2013
    The resort
    https://t.me/pump_upp
    Messages
    141
    And the fumosit? I guess it's nothing now?

  7. #7
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    55
    I changed the right one this evening on a R500 with the same problems and with the sensor ? everything went well
    this ? one of the defects of scania, has the pressure sensors and the temperature is very delicate

  8. #8
    Banned
    Date Of Registration
    Feb 2013
    Messages
    3
    but the diagnosis is not from nothing igor?

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •