hi to all, I would like a clarification on this control unit edc 16 mounted on the daily 35c13 2.8 jtd unfortunately the ecu is damaged eriparata pu' times avvrebbe decided to replace I found an ecu with the same code iveco and code bosh but I don't know if it's the same as hw and sw, but it is a daily 35c 10 e4 16v.
do you think that I can replace or do I have to do a bdm ?
Hello , if you have the same number Bosch and Iveco the hw ? definitely equal , will change? the sw , but if you do it in the BDM will go? definitely good !
quoto if the number 028....... ? equal them steps the backup from one ecu to another and are affixed toOriginally Written by ecutano
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
I forgot , the control unit that mounts to the Daily 35c13 2.8 jtd ? a Bosch edc16c8 , no, as the title EDC 16c39 , that the mountain of the engines pi? evolved on the vehicle pi? recent , however, make a full Backup of the old ecu and write it on the new one that you go to mount the perch? most likely the vehicle has the immobilizer,
Greetings
you can safely put the numbers chip different the important thing is that the number bosch or the ecu is the same and you can place the file on the chip, or flash by obd while for the backup number, the control unit pu? differ but only the last 3 numbers better if higher
quoto loads with all the bk with the bdm and the game ? the fact
thanks a lot guys I was dubioso before acqiustare a control unit between the high I units, but have not yet seen why the work of the workshop of a friend of mine today, though, I'm going to take and I'll know
Write permission
Quote