Opinion Panda 1.3 MJet 70 hp

[Lucif3ro]

Good morning forum!
I would like to map a panda my friend, but I have heard several issues on these ecu Marelli, and often read the post to lock the ecu.
For what I understand is that for?, the problem it seems to me that it was error on the part of the user and not the tools used. I try to explain better.
I read and saved the file ORI through MPPS 6.3 and got a file 448 kb.
I've made the changes and saved the file, resulting in a file of the same size.
For what I understand, using the same tool, read-write, should not be a problem. (in my case, I repeat MPPS 6.3)
Since I am still at the beginning, it would be useful for me in addition to have confirmation of what was asked above, have also your opinion if it can? or less go the change (no big claims, only those few horses in the pi? seen the limits of the said car).
Place the file ORI and MOD for a vs gentile verification:

Waiting for a response vs,
Good Sunday to you all!
thanks in advance.

[Lucif3ro]

Oh god! sorry...me to sleep is to give the numbers. MPPS v12 (not 6.3, that ? the v-ECM2001). Sorry :P

[rego88]

according to my opinion you have given too many increases since too little load rpm and the pedal to the map injection... does not need parts from the first curve (800 rpm) but the parts about the tenth curve (1400 rpm) and the met? it curves around.... 50% load, you're also wrong increases.... in the sense... to 13% of the load, you can't give hypothesis 10 points and all 5.... but, on the contrary....c'? a map that I don't know.... but there are other maps from the tap.... in the maps pedal c'? some point in the negative.... proofread it....

[Lucif3ro]

in the sense... to 13% of the load, you can't give hypothesis 10 points and 5.... but, on the contrary....

Day rego! grz x your info, could you explain better the example above?
with regard to negative values, in the original you have already? the negative values. For an increase in "regular" should not remain as such?
What other maps should I change? considers that the use ecm2001. (s?, have a ball at the foot :P )

[franco75]

I remind you that increase in % negative values mean decrease

[munro]

I read around that call the maps pedal or Dw in the marelli not ? correct....for? I can't tell you why...
on the web? I found this screen which I believe to be of winols....if you can translate the symbols in the image, perhaps you would understand more...


Uploaded with ImageShack.us

[FidodidoTuning]

Are the cell and you see evil,however, and the required torque...tourque riquest

[munro]

the exact wording at the top of the screen are
1)BrkTrqPReqToffAc
2)BrkTrqPReqToffRp

[nuovaecu]

Can you post the number ecu? Hardware and software?