Nissan Cabstar 3.0 Immo Off

[Macchinista]

Hello to all. I have to scodificare a Nissan Cabstar 3.0 of 2001. The ECU is a Bosch 0281010452, mount an eeprom 24C04. I know there is the emulator for this ecu (that I have already procured) but the problem is that in the manual there is the solution of the eeprom for the Cabstar 3.0, but only for engines 2.2 and 2.7. I've already tried with the solution proposed in the manual of the emulator (for motors 2.2 - 2.7), but the vehicle must be in motion for a few seconds and then go out. The led on the emulator is blinking fast.

Can someone help me?

Thanks.

Eeprom 24C04 Ori: Nissan Cabstar 3.0 2001 Bosch 0281010452 EEPROM 24C04 ORI.bin.zip

[leo_sg]

I have tried at least 6 of the file, but without results

[Macchinista]

Update: I found a file over the network to the eeprom 24C04. With this file the vehicle must be in motion and it all works but it remains the light engine on. I have not yet had time to do a diagnosis to see the error. I will keep you updated.

I am attaching the file: 24C04-MOD OK but Light Engine ON.zip

[mafani]

surely it will be a total e2p to leave the light on,see if you can go back to the dtc, the limit do scludere that

[Macchinista]

It seems to me there is not the total from the eeprom for this ecu as far as I know. The only thing is with the emulator. Using only the eeprom do partial, it seems to me.

[mafani]

I do not know how to tell you this,but on some from e2p is also total

[Macchinista]

Is this safe!

[Macchinista]

Update: the file posted above works perfectly. The light engine remained on for another damage on the vehicle not related to the scodifica.

[legendaryslave]

Update: the file posted above works perfectly. The light engine remained on for another damage on the vehicle not related to the scodifica.

that file with the emulator ?

[Macchinista]

He goes there to force the emulator!!