Egr closed on Momo

[abberello]

Hi, I could check if this is a map of the Ypsilon Momo 105 cv goes well cos?? I should have just closed the valve Egr.

[msport (exil77grande)]

Hi, I could check if this is a map of the Ypsilon Momo 105 cv goes well cos?? I should have just closed the valve Egr.

I don't know how you managed to edit the map egr when the file is not good,the size must be 2m and can not read with mpps, but perhaps just write cut to 1m.

[abberello]

Pi? what else I don't know how to ever with mpps v12 I had the chance? to download this file...

[abberello]

On the gp 75 hp the read button does not appears to me..while on the Ypsilon me ? out. You know what ? due to? It is a software error?

[msport (exil77grande)]

On the gp 75 hp the read button does not appears to me..while on the Ypsilon me ? out. You know what ? due to? It is a software error?

the gp is only 75-90hp then 100% you can only write instead of the lancia y there is 70 75hp then you can also read.

[rego88]

especially the lancia ypsilon momo design 105hp mounts the same electronics of the lancia y 1.3 mjet 70cv.... not to be confused with the electronics mounted on the lancia y more new 75-90hp that you can only write....
anyway, from what I'm imagining.... do you want to write a file to a momo design on some other car?? or you need to close a valve on a momo design?? if you have a momo design under the hand.... can you see me that turbine mounts?? the initials of the injectors and the high pressure pump what shows on the label??? 3 photos would be the ideal.... thanks a lot

[abberello]

yes, the machine ? one of my cousin's, I can just go take the data that you need

[zioweb]

the gp is only 75-90hp then 100% you can only write instead of the lancia y there is 70 75hp then you can also read.

especially the lancia ypsilon momo design 105hp mounts the same electronics of the lancia y 1.3 mjet 70cv.... not to be confused with the electronics mounted on the lancia y more new 75-90hp that you can only write....
anyway, from what I'm imagining.... do you want to write a file to a momo design on some other car?? or you need to close a valve on a momo design?? if you have a momo design under the hand.... can you see me that turbine mounts?? the initials of the injectors and the high pressure pump what shows on the label??? 3 photos would be the ideal.... thanks a lot

I'm sorry, but you have not said one thing correct.

The Lancia Ypsilon mount electronics Nevertheless, 6J mice on 69cv and 6F3 (the latest chip spansion) on the 75, 90 and 105hp.
With mpps ? you can read BOTH of the models since? the Lancia Ypsilon and the Lancia Musa still have wired and configured the line K, a difference of the same family 6F3 mounted on the rest of the range fiat/alfa that you can only write in CAN.
For this, the Big Point you can? only write and not read.

Attention, to read the 6F3 you need to have MPPS v12, at least, and choose the right "driver" reading of the 6F3 that creates a file by 1mb, otherwise it reads a file from 448kb that ? one of the 6J from 69cv, in addition to being small, it also has the disadvantage of not take the memory ranges that are just right for touch maps, and thus completely useless.

Your reading, if you have a MPPS v12, ? was made with the "driver" wrong for the 6J, you choose the one that 6F3.
If you have a MPPS pi? old, the you can read and, personally, having never tried to do, I write it with the file from 1mb

OBVIOUSLY I'm not talking about the New Ypsilon 5-door.

[abberello]

I have a cable, mpps v12, and I've done the reading of the map, and the map ? the one that I posted about..I don't know how I never ? output from 400 kb

[abberello]

I'm on this car I just want to close the egr valve...