Dpf Off edc16c35

[giuseppe89]

Hello guys I have a problem with the dpf of a bmw 335d and I would try to delete it.Are not able to delete it manually and I was wondering if time works well on this ecu, and if not, with what effects...if anyone has the time I attach now the file ori and mod by serial reading (if the file "may go" I would do a backup first then write it, however, in bdm) I Wanted to know if I have to use some caution especially with these ecu's or are of the usual edc16.
Facedo id gives me the following data: 0281014206S 1037383837

[munro]

Time it's not good for the DPF off on this..
Even manually is simple..
The why lies in the fact that in a BMW if you make us case, for example, two files having the same numbers of hw and sw to the practice, then they are different.. don't ask why..because I do not know miss you I..
The only SW that works well to make DPF off on this and *******..
For the ECU you have to use tools that write the data as complete galletto v50 or higher or kess or x17..if you use for example mpps, the write lock..

[giuseppe89]

Munro thanks Dell intervention to write to use a galletto v54 but at this point, having problems to do so, I believe that I have no more solutions...I can see if around I find the swif... or other info thanks anyway!

[cawadany]

I'd recommend you to do it in bdm. Too many cases of the ecu locked on these....
If you want I can post a file to try.....

[giuseppe89]

If for you is not a problem for me cawadany. Thanks

[cawadany]

Read it in bdm and email the file.
Instead, if you want to risk in the obd.... I'll give you the file, beginning from your in the obd....
Tell me....

[giuseppe89]

The file bdm do not think I can post it before tonight, late,if parts from the obd and then the coating I mod the file with the bdm?

[munro]

Or you read it in bdm or read in serial the file eprom always 2mb..
The only thing is that if you lock the ecu, write the serial with the backup in bdm the resume quietly..

[cawadany]

Or you read it in bdm or read in serial the file eprom always 2mb..
The only thing is that if you lock the ecu, write the serial with the backup in bdm the resume quietly..

If it is 2mb, it does not mean that it is the same.

[cawadany]

The file bdm do not think I can post it before tonight, late,if parts from the obd and then the coating I mod the file with the bdm?

Here is the file obd no dpf. Do reset of parameters of the dpf before writing this file.