exclusion egr on 166 2.4 175cv through ECMtitanium...

[Emanuele54]

Hello all,
if you try (for those who use ECMtitanium) to open the file of a 166 2.4 175cv, between the maps that manage the air, you will find 3 maps...
1)valve, exhaust gas recirculation
2)percentage valve
3)management valve duty cycle

now if my work I have done in the correct way, the first and the second map to manage the egr and both I have to shut down, correct???
while the second one, which should control the management of the butterfly I can not even touch it.

Thanks

[Chris156]

s? ? edc16 ? wrong the closure and it will give you a failure..? edc15 ? right!!
If I remember correctly it should be a edc16 c8.

[munro]

is the 166 as well as all of the engines mjet 2.4 euro3 mountain edc16c8 the procedure to close the egr is f? eliminating three "panettone" directly from the controls to the addresses 0E3F3A,0E3DBE,0FBEE4 at least for ecm2001 then for the titanium s'?..but I think the addresses are the same

[msport (exil77grande)]

Guys careful because? you are slightly out of the way why? the panettone from zero are 4 and it is about half the panettone, otherwise the machine will not run,here you can find the guide with the screen that shows you how to do it http://www.professionalchiptuning.ne...po-bosch-edc16

[munro]

and true msport the "panettone" from zero are 4...

[Emanuele54]

..for now, I can't download anything.....
I'll post the map cos? do you see what I combined and then you tell me...

[Sasà81]

I on the edc16c8 put to zero all the curve controls the egr.
If I remember correctly, are curves 25bit and there are 4 in succession.

[Chris156]

is the 166 as well as all of the engines mjet 2.4 euro3 mountain edc16c8 the procedure to close the egr is f? eliminating three "panettone" directly from the controls to the addresses 0E3F3A,0E3DBE,0FBEE4 at least for ecm2001 then for the titanium s'?..but I think the addresses are the same

I confirm that they are 4..
for addresses remain the same on all the sw display.

[Emanuele54]

Hello msport, can you please post the modified map, tell me what do you say...
the egr should I have it removed, but as a maps control, I see two maps named, "deal? exhaust gas recirculation" and "management valve-duty cycle" that should always affect the egr but should not be touched?


other maps that you say?
Thanks

[rego88]

I can not open the attachments, however, you... c'? to take 0 4 cakes!!!