The problem with the EGR FORD SID 804

[lui93]

hi guys after reading the map of a fiesta 1.4 68cv and removed the EGR valve today, I covered the machine again with the light engine is on and the following
ERROR CODES - P1412 - P0406-P0404.
qulacuno could give me a help? thanks a lot

[cinqueturbo]

If you're sure you've done the exclusion in the correct way, the valve has the electric route..
time or replace, or delete the DTC that gives you the diagnosis..

[lui93]

the starting power is ok, but I can not hunt the sti dtc cinquecentoturbo

[lui93]

anyway, I think that sdei one of the only that always helps, THANKS CINQUECENTOTURBO really.
I admire you very much to differenxza of altriiii....

[cinqueturbo]

Are today I do not understand a bat of what you say???
or are you who you want to spite me?
I repeat are you sure that you deleted the valve from the file??
error:
P1412 valve stuck
P0406 valve position incorrect
P0404 field performance is not correct
in all three cases
EGR blocked,jammed,electrical fault,wiring,engine control unit faulty etc etc
now what do you expect from us?
that will eliminate the DTC?
you check the file?
In Both cases, YOU have to POST at LEAST THE FILE ORI and still do better to also upload the mod if you are not sure,
now let us see what you need??

[lui93]

alloraa...
1) I don't want to the job done by anyone.
2) I just thanked him for always being available but I know that I can read what you want..
3) this is a forum for dialogue and help if you can solve the problems.
4)I do Not do mischief to anyone, because I asked for a simple help.
of these only the 3 files ori + mod1 and mod2

[cinqueturbo]

You've read all this before giving me this answer and have uploaded the files?

doesn't it seem like something is not right ?

I have written:
If you're sure you've done the exclusion in the correct way, the valve has the electric route..
time or replace, or delete the DTC that gives you the diagnosis..

you tell me:
the starting power is ok, but I can not hunt the sti dtc cinquecentoturbo

I I say:
In Both cases, YOU have to POST at LEAST THE FILE ORI and still do better to also upload the mod if you are not sure,


Then you make me understand??

if the electrical part and being affixed to "I don't know how you checked" then you have ended badly the EGR no?

or do I have to tell you Ok you're right and to go to that country?

However, after 6 posts, I say to you that you have not closed the EGR in the correct way...

Thanks for the estimate 06DDB0-06DE3A

[lui93]

thank you for the help..
I don't want to, so is to misunderstand and nothing else.
just wondered a help..

[Errecinque]

thank you for the help..
I don't want to, so is to misunderstand and nothing else.
just wondered a help..

Disconnect the plug and eliminate the dtc 0406....just the one on this ecu...and I think if I'm not mistaken di avertelo I have already told in another discussion here in the forum

[lui93]

and in fact, I did as you said but you turned on the light!!!!