Turbo pressure fiat 500.

[lui93]

Hi guys I wanted to know if anyone of you has encountered this problem, the fiat 500 1.3 mjt 75 cv.
thank you in advance, ps the car with dpf and egr off the most relative increase.

[saetta]

Hi explain a little the defect thing laments the errors in the ecu,

[the shiston]

in the diagnostic error codes come out??

[lui93]

in the diagnosis port to turbo pressure

[lui93]

Error code p0237 what could be the turbine going?

[saetta]

take a ride with the diagnosis and gauge pressure the turbo see if there is pressure, especially to see if it works the pressure sensor,controls the variable geometry and if there is any pressure hose cracked.see also if and remained open egr valve

[cinqueturbo]

Hi guys I wanted to know if anyone of you has encountered this problem, the fiat 500 1.3 mjt 75 cv.
thank you in advance, ps the car with dpf and egr off the most relative increase.

Tell me and a 6F3 or a 8DF??
Maybe also post the file that we check together if there are errors to correct..

[lui93]

that's fine guys thanks a lot, tomorrow morning the place ..
you are really kind
and a 6f3
egr valve closed pipes ok..
I think it's the geometry that's going away

[msport (exil77grande)]

that's fine guys thanks a lot, tomorrow morning the place ..
you are really kind
and a 6f3
egr valve closed pipes ok..
I think it's the geometry that's going away

go before the pressure sensor again and then proceed gradually.

[the shiston]

******** tells me that or is it the sensor or the turbine itself