Printable View
Guys please can we do a sort of guide or, better, as the title says tread we can make a little bit of clarity on what official tools and do not read write this ecu by serial?
I knew of piasini, who would do such a thing can someone report his experiences?
thanks to all
Hi, kess v2 reads well in serial, but I advice you to do a backup first in boot mode, and more secure, in the serial read and write nn, and never safe with any tool that uses ..
legeg always in virtual???
Boot mode with fgtech always smooth in serial that was planted several times, always with the same tool
kess2 clone ver 1.89 (or at least not my own) bott by error, while with the cock all smooth
kess v2 clone, in serial only virtual read, written, many times, never a problem.
it is true that the kess v1 or the magpro read write from serial port directly to a file by 832kb?
I am with the kess is with fgtech in boot mode n I have never had problems, I have friends year read in from the serial port and then written to the times without luck the ecu locked...
Legendaryslave can you please send me the picture of how the.put it in the boot with fgthec v54?
no one knows anything?Quote:
Originally Written by munro
You. ..kess law that dimension and is recognized automatically by the Titanium. ..the cock is a reading of a different length and the file to be cut x recognize it to titanium
only the kess v1, I think I understand the v2 law, however, a file from 896k but not serial...
the tread is trying to do chairezza there is no confusion if you want to post something that I would be a little less hasty and describe their experiences.
Thanks
I didn't mean serial...but read in boot.....with the kess v2 to read the files that are already suitable x titanium...more clear as well. ..the cock is a reading of a different length.
At least...I have read a couple in the boot with kess v2 ....in the serial I do not dare...to read or to write...
In fact, Munro if you notice I have asked for the photos of the process x, and put it in the boot with the rooster if there is I have is I have never tried. ...
hello, from what I know, for the indirect experiences (friends of the profession to which I asked for) told me that between the addresses 8000->18000 (hex dump) on the file from 832k are missing, in fact, by integrating this part you get to the size of the file is 892k.Quote:
Originally Written by munro
I don't know, honestly, the content of the missing part, perhaps the e2p, I don't know... I shot them..
Word to those who work there every day!
To make a short summary:
-Reading in the boot with the rooster: file 896kb
-Reading in the boot with other tools (e.g. mpps): file 832kb
For moddare the file, if we were to read with the cock we have to follow a couple of simple steps.
Materials needed:
-Read in bootmode by 896kb
-Sw editing for chiptuning or hex editor
Our goal is to eliminate the first 64kb, to do this (I will use the example sw of editing moltoconosciuto Titanium):
-Tools ---> Conversions ---> Cut/paste file
-Let's click on "user defined" in item "save file" on the bottom left in the start field, insert "010000" leave unchanged the field "end"
-Let's click on the button "save"
-We finished, now our file 832kb is ready and our beloved sw of editing recognize the file properly
To write it again just do the reverse operation and bring it back to its original size by adding to the file from 832 64 kb cut
can we please avoid spamming the thread?
the title, and read/write serial me7.9.10 it seems to me that no one has asked how to read cut write a file to this ecu in the boot among other things, when you add the 64k missing file from 832 the cks becomes wrong.
How?? We were talking about lengths, files, etc etc... this is spam?? An explanation how this is not spam. ..then you do...for the cks have added you...what should we do?
the procedure that you posted is also wrong according to me because
just cut 10000 bytes to partiere from byte 8000, not from 0!!!
And you can switch between Gallo, CMD, Alientech...
The only difference between a buzzard and the other tools are the 10000 bytes between address 8000 and 18000.
it means then that
The checksum is only correct on the final version. It means that to make the correction on a file, 832kB, and enlarges on 896kB will not work.
the procedure used is the following:
Open the ECM Titanium, (but even the 2001 is the same)
Open the read file in the boot (obviously will not find the driver)
Open in the menu TOOLS->CONVERSION->CUT/PASTE FILE
Select USER DEFINED and put as the beginning 000000 and the end 007FFF and click on SAVE as, call it as you like
Select now as the beginning 008000 and end-of-0DFFFF click on SAVE and name it according to how you think
Close the window and go to TOOLS->CONVERSION->CONCATENATE TWO FILES
Select first.cnk and give ok, then the second.cnk and give ok and it will eventually ask you where to save the file .ECM give the name that you want and save
Now open the ecm file that you just created with the extension of the ecm, and should rilevarvi the driver with correction of the checksum, and should be writable with mpps, etc, etc,
Try to do it the way I do it...it works!
but reading in the boot with kess v2 and be done?
if I have to risk removing...
It would be interesting if someone postasse a guide on how to read in boot this unit.. I tried to read it in serial, but it only makes me write (kess).
in the tool you have all the explanations to read in boot mode this ecu.Quote:
Originally Written by Four-leaf clover
in the tool of kess?