Fiat fiorino 1.3 mjet p0234

Good evening to all. Today, and got a fiorino 1.3 mjet of the year 2008. The diagnosis gave me the error code p0234 that would be the pressure sensor. After that the changed. But the error ce.what do you think

watch the barometric pressure and turbo pressure with the engine off and see if they match

But the parameters them to the visa's you?
however, pi? a had the westegate route, take the vacuum gauge or a tubiccino and pulls to see if it holds..

not only that, look at the values of pressure obbettibo and the pressure measured with the diagnosis and have a look when you deviate, perhaps you only have the geometry p? seized that ? slow to risponere and solve cin a spray from cleaning the egr with the engine running

I don't know if the forint ? the same, but to me ? happened on a doblo' which had broken the rubber sleeve on the intake right near the entrance of the intake manifold and I trusted that bug them, it checks well.

follow the advice of colleagues also test to see if the westegate gets all his race, otherwise to the problems of variable geometry

Hello, if you can, e-mail of the parameters that we evaluate them together, also the air mass, it is important for this dtc. If after the checks that you have indicated the colleague does not resolve, check the status of the egr valve.

check out all the pressure hoses and arias valve west...

begins to see if the westgate moves when put in motion

Usually and the westgate that does not open..

but the medium has good performance before the error?

considering that this is a very fair response

considering that this is a very fair response

considering that this is a very fair response

Problem solved. I replaced the pressure sensor and the sensor spots of differential pressure. After regeneration forced .