Printable View
I'm asking for your help, I did make a map for my car, but after a few steps I continue to hear when it goes to copy at around 2000 rpm, a vibration in the motor, maybe you will? the flywheel ? now I would like to reupdate the ecu with this new file, you can please give me a check ?
thanks to all of you.
where did I go wrong that no one is giving me a hand ?
Hello niodemob, no I understand what makes you the machine, I can describe the problem better?
hi Anthony, after the remap acceleration vibrates the front of the machine seems to be the flywheel bmassa, I'm afraid of splitting, I have attached a zip file, inside you will find three files: ori, new, and what makes me vibrate the motor. I would like to put the file named new, to the possibility? of controllarmelo ?
Thanks
I can not download it I'll send you my e **** in pvt. Try doing this test with the hood open and the machine is in motion, (you would need another person that will shut down the machine) with the head in the engine compartment do not turn off the machine and see if you feel some vibration
Hello nicodemob made the test?
the file golds that I have shot are of opel astra 1.7 cdti 101 hp
is the test ? was made, that's okay, it vibrates more? the Bimassa, but makes it less than that ? it is done by a professional of the forum.
I have not sent any files, are included in the discussion.
hello
The Ford Kuga-136 HP unfortunately, structurally, and' hurt ****llo transmissions , are undersized for the weight and the strength of the engine .In practice, just give it 20 hp and she vibrates like the BMW E39 530d when you mappavo enough thrust.
What's the most' suitable' to make a map and progressive with a maximum of 15 hp .
The Kuga 163 Hp and a whole other thing , it has the whole group, transfer case, and transmission of the biggest and this problem does not exist .
Greetings
I'm sorry I confused
hello I will give a hand to make the file progressive, thanks
if I knew I did not do anything.
Gladly !
grazieeeeeeeeeeee friendly, very good work !!!! it vibrates more? and the machine makes well, resolved at the first step milla thanks.
I'm glad that the ns. professionalism will be of your liking .
Greetings
Guys I know the discussion is old but in order not to open another wanted to know with which interface you read that the kuga? I have a galletto v54 and I would like to read the car of my uncle,the only thing I know is that the ecu is a continental and the car is the 136 bhp year 2010.mica antituning or problems anyway in reading the serial these drive?