Hi guys,to unlock the ecu with antituning c'? a standard procedure or varies from model to model?
Printable View
Hi guys,to unlock the ecu with antituning c'? a standard procedure or varies from model to model?
I am interested I also especially for the edc17 and med17
Hello
Varies from model to model.
Thanks Gezame,if I'm not mistaken it is by connecting the box that comes with the kess v2 I speak of the clone
I assume that you refer to the add-on module to Boot, but I don't think is also used to unlock the antituning..
is what I was referring to...
I with the kes v2 clone they gave me a plug for edc17 and med 17 I've checked it now
exact one ? the jlink and the other should be to unlock the ecu...knowing how to do it, of course
not ? to unlock, but to read and write edc17 and med17 over the counter in bootmode
Ugo for the case you know the procedure to unlock them?
if I can say, what is it to unlock an edc 17, once you open the ecu and read the backup files to the micro e2p and flash modify and re-enter in the boot and to avoid the antituning
You for? if I wanted to remap the 2' time, if not the unlock you will have to force rewrite it in the boot and not from the OBD..
as you unlock I don't know, but as you say if I were to map it again, open again.
The release on some ECU edc17 the perform with ktag.. Official has integrated the tool otherwise has to be done to make the hand if you know the bit change
do you know how to locate the bit?Quote:
Originally Written by oakley1
I've posted an example last week of a edc17c46, look at it. Not ? nothing sensational , just a bit put to zero that disabled? the tprot
the box that they give you with the kess clone should and I say should be in the form tricore , to remove the antituning by the control units serving the ktag , the function of "unlock" ? been implemented from version 2.02
on which discussion you posted the example?
On this discussion:elimination-antituning-edc-17c46 but I know that you can't download the file again
? I know , I've read the rules , vabb? take some? to say that I have to wait , the thing I'm very interested in seeing that , my car has the same electronics and I would like to read it/write it in the obd , I am appalled to weld
What tools do you have?
kessv2 master and the tricore
And then if ? updated the kess has enabled the edc17c46 by obd
yes, but first you need to disable antituning with the ktag otherwise you won't read
I know ke the cmd with the new updates makes all the edc17 and pcr 2.1 etc with antituning all by obd
the additional interface to connect to the kess, serves to communicate with edc17 and med 17 tricore, always and forever , no need for the antituning.Quote:
Originally Written by rampman
You ugo but always in boot mode right?
certainly, serial obd using the normal cable.
The release consists of bringing those 4 numbers zero to a string?