Printable View
salve raga...I'm venturing from a few days to do some tests on my 308...I've ruled out the egr and fap and I gave it a retouched going to a p? time...the provision, for the moment, I don't mind...but he continues to remove diesel clutch slips...the car has 114k miles and it seems strange to me that slip already?...among other things, smokes a little and nothing...I'm attaching ori and mod
the map does not ? well done,but not completely evil,and diesel fuel are given so much and hurt that's why you slide the clutch and you bad rooms, the management turbo not ? well done,if you attack the diagnosis you'll see that the turbo pressure rises and falls like that of the rail,you have to reconsider many things
Should I remove diesel in the whole of the map???if you notice the high rpm ce n'? pi? just because I wanted to "make amends" as under the I had to remove...and I did it by compensating for the above...I have given it so? also to see up to which point the car did not smoke...that the turbo does not know to manage well even if I wanted to increase the points as that of the rail...at the end of the accounts ? one of the earliest maps...advances what do you think???
not ? too,but pi?,we say that has the opposite effect, all that diesel,the advances are ori.......for the clutch, if the slide ? way and should be changed
I revised a bit all over the map...and in particular I went to touch of the maps that are there, both before and after the map name injection correction...they are almost identical...can you tell me what indicate????pi? later, place the new file...thanks
Does not go into recovery machine...changed in a strange way????namely,????
For example, not campisco why? in the map to be 1E9BBE to 1E9EBC the last of the original curve ? to zero and you've raised. Then I do not understand the pressure rail why? in the map objective except the 4 map similar to the other 3 go well beyond the limiter. the original comes to 1600 bar max, in the first map similar mod I find a max value of 2020 bar.
And are welcome...the map now don't even remember the point to point...when I start the PC I'll answer you...what I wanted to understand were the maps before and after the injection correction
Do not be offended if off as a balcony!!!, 26% rail pressure up to 1600 bar, have you any idea of how many are???? if you do not invoke the limiters could burst pump seals and injectors , I am talking about step5
try to think before making changes of this kind , or, better, try to to know the values of what is referred to..... then map the pedal exaggerated as required , see it in 2d the various maps, there are peak strange , maybe ? the tita , lim torque too high if you have the clutch damaged , the times without logic , you're trying to throw fuel on the rivers , advances ori , short parts on the cautious hope that step5 you have not written ,there are several ways to give diesel and burn it , that ? the purpose of the tuning (tuning) all the diesel fuel injected Must be burned!! and to maximize performance , without creating problems in the short and long-term explosions of various
emissions from Tirrenia, or other
Step 5 I have loaded...I'm trying the step5 revised...my question but no one answered yet...
step5 revised , what is the question?
it seems q.i saw on the fly