Printable View
Hello Raga , give me an opinion on these files no crasch for this unit G. the Point 51754872.
I tried the file golds that I attach with two different programs , but I have noticed considerable differences between the two files , while I expected them to be equal , which, according to you ? correct ??
try this and let me know
Thanks tomorrow I will have you know , you've given a look at the file I posted ??, they can go ?Quote:
Originally Written by legendaryslave
Hello legendaryslave , the crash ? cleared and there are no errors in the ecu , the problem ? the km framework will flash, and you are not able to align the AirBag control unit , with the proxi.Quote:
Originally Written by legendaryslave
But the files I posted are OK or not ??
do it with the fiat ecu scan aligns well these ecu I have seen your file but if there are no errors in the ecu means that the file ? ok
if you do not solve I'll give you the other 2 I testatissimi and I do know!!!!
Thanks Carlo , tomorrow you update it.Quote:
Originally Written by carlo abarth
Hello Carlo , now I can align it to the proxi , but I get as an error " control unit faulty and incorrect configuration ", while with the file provided by legendaryslave I had no errors in the ecu, but I could not align the proxi , I forniresti the files that you said tested , ThanksQuote:
Originally Written by carlo abarth
The miles that are flashing are due surely to the airbag? The great point in question has the form Blue&me?
The car and without the Blue&me , the problem ? definitely due to the AirBag ecu , I tried other files that allow me the alignment Proxi , but in the failure memory I have of the errors that are not cancelable , while with the file legendary I don't have errors, memory faults, but I can't seem to align the proxi and then I have the odometer flashing !Quote:
Originally Written by Antonio46
Greetings
Not ? that are present the km in the file, and do not correspond with those in the framework?
you do one thing then postami the file once you have aligned the proxi-and you lampeggiani the km rileggilo that you edited manuallyQuote:
Originally Written by ecutano
Legendary us do know what does not align the drivers you rigrazio
Hello legendary , which file ? the ones I have tried where I could to align the proxi but I had errors in non-erasable memory failures ?, but with the file golds that I had posted not ? possible to extrapolate the data you need ?, what determines the recognition of the airbag control unit at the Body Computer ?Quote:
Originally Written by legendaryslave
I was looking for a unit in demolition , I thought I had a problem with my ecu ori who has suffered the crash !
Greetings
I re-read the file once aligned, the proxi so as to clear the crasch on the gi file? aligned I don't know if I expressed myself correctly
It is clear , I do the reading and the place !, as soon as possible.Quote:
Originally Written by legendaryslave
Thanks Regards
hello l,proxi alignment on the airbag fiat riverginata you have to do it with multiscan,try it and you'll see that it works
If you've tried it with ecuscan and with exminer and nn,try another ecu..let us know.
I have already? tried both with *********** with IDC4 Texa , but you can't align the Proxi.
but to change it is the control unit with a demolition no? :confused:Quote:
Originally Written by ecutano
if you take a demolition working the laws and then you realize, where is the hitch..