1092Y158

Printable View

Phantomat85

Attachments: 1

Opinion on file YPSILON 70cv NEVERTHELESS 6JF Y1/HW01C/1092Y158

Hi all, I have read the ecu of my ypsilon with mpps v12 and I would like to get an opinion from you.
My car has always done it a little more? the smoke of the other, since the purchase.
After a couple of years, I've made remap from a tuner (which has now closed due to the crisis), and before the close, I made it back to the original.
The problem ? that, however, is a lot of smoke too. I've ruled out the EGR, injectors, dirty mass air flow sensor and I ? left to check the ECU before opening the engine..
? everything ok?
Thanks a lot
munro

to me it appears that mpps v12 does not read the marelli mjd6jf....
however the file ? completely ori....
Phantomat85

Quote:

Originally Written by munro

to me it appears that mpps v12 does not read the marelli mjd6jf....
however the file ? completely ori....

You me to read it without problems.
have you compared the file posted on the forum?
michell

I confirm ...perfectly ori.....also the egr ori... anyway munro mpps v5 also reads very well y70cv.....
nasone147

Quote:

Originally Written by Phantomat85

Hi all, I have read the ecu of my ypsilon with mpps v12 and I would like to get an opinion from you.
My car has always done it a little more? the smoke of the other, since the purchase.
After a couple of years, I've made remap from a tuner (which has now closed due to the crisis), and before the close, I made it back to the original.
The problem ? that, however, is a lot of smoke too. I've ruled out the EGR, injectors, dirty mass air flow sensor and I ? left to check the ECU before opening the engine..
? everything ok?
Thanks a lot
21-10-2013, 22:30
munro

the car has no geometry....
has turbine traditional...
jovandj

Quote:

Originally Written by munro

the car has no geometry....
has turbine traditional...

quotone has only wastegate, fixed geometry only an overboost electronic
21-10-2013, 22:45
legendaryslave

Quote:

Originally Written by munro

the car has no geometry....
has turbine traditional...

I ? happened the rust stopped, the joint of the valve
nasone147

Sorry..l I had also read 70cv!! :-D
Phantomat85

Quote:

Originally Written by nasone147

I could try to do some diagnosis with the engine on...
Multiecuscan could do in my case?
jovandj

Multiecuscan and perfect to see everything, even in the free version as far as the control engine
munro

Quote:

Originally Written by Phantomat85

I could try to do some diagnosis with the engine on...
Multiecuscan could do in my case?

check the egr and especially in the condition of the intake manifold where you put the egr....
on those car due to the fact that the egr tube ? very big in relation to the inlet manifold tends to get dirty a lot and to clog quickly not letting enough air...for which the black smoke...
sa80libero

also autocom on this car will be rich
jovandj

Quote:

Originally Written by munro

check the egr and especially in the condition of the intake manifold where you put the egr....
on those car due to the fact that the egr tube ? very big in relation to the inlet manifold tends to get dirty a lot and to clog quickly not letting enough air...for which the black smoke...

Also, check through the diagnosis fixes inj if they fall within the limits, egr, was the mass air flow sensor, pressure sensor, air...and let us know
22-10-2013, 12:48
nasone147