Hi all guys, I would like to know if software such as ecusafe or carsoftware FAP DPF work on the ECU IAW 6F3.
Thanks to all for the help
Printable View
Hi all guys, I would like to know if software such as ecusafe or carsoftware FAP DPF work on the ECU IAW 6F3.
Thanks to all for the help
Quote:
Originally Written by carbo92
hello if I remember correctly it does not do it ecusafe ne time..only solution or manual or *******h...
hello
You of time, I knew that... but carsoftware? Or the manual procedure who can? give me a hand?Quote:
Originally Written by voglioimparare
Compare them in 2D through the ecm you say?Quote:
Originally Written by voglioimparare
Quote:
Originally Written by carbo92
Ok just so I'll try... thanks
You may postarmi the file or tell me the reference numbers? I had a look but not at all ? written where c'? the FAP.Quote:
Originally Written by voglioimparare
Thanks
sorry as f? to understand what to change if there are two sw with the same numbers with and without fap ?
you have to know what to touch, just be spending your time on
sorry, but I found the discussions that speak well of Time to make luca stanca on meriva 1.3 cdti... confirmed negative, carsoftware
I can confirm the same thing for the negative experience had on the same drive.Quote:
Originally Written by desmoric
hello fuorigiri12000, sorry but interndi negative experience, with Time or with Carsoftware?