Printable View
Hello all, after my presentation a few days ago, I'm back again on the forum with some questions I need help from you experts!
I edited the file ori of my alfa 156 1.9 jtd with ecm 2001 v. 6.3 and I have checked with titanium v. 1.61 now I'm worried that the driver
the driver:
A156_335
A335_054
A367_363
they are all perfectly compatible even if I only logical that I would use the first,as far as the map again with more logic and policy, all of the maps in the injection and the pedal,the rest can go.
hello msport, what do you mean pi? logic? I lifted up the whole 10% is too many? as always thanks for your helpfulness
logic means logic,that is the meaning of all the 10%?Quote:
Originally Written by romeo156
10% of the maps are injections and the pedal the rest you said that it goes well! cos'? according to you, that's not good with maps and injections? what do I have to redo?
I have to say that this map was made in % and I know something ? wrong for this, I ask you advice to give me a tip what to improve! I don't need a new map if it's there, and I have already? one, I only ask for advice what I need to improve, not tested yet for fear of splitting the car!!!
it is true that the limiter rail pressure, should be increased a little more? compared to the rail pressure??? I have put around 5% of the map pedal goes well cos? 10% or do I have to lower some point??? I have read several topics and each one tells its own but I'm not going to experiment and try, I only have one machine, and if I break are caxxi!! I hope someone pazientoso my encounter and gives me useful advice...thanks in advance
Hi romeo, the best way to learn ? read a lot and try to see what you will get.
I was on my edc15 I've lost count of the scriptures that I have made with the old cock 1250.
From experience on my car, I can tell you that even if by mistake we upload a file to a different hardware, and you go into panic why? do not put more in motion; do not worry : re-enter another time and everything you system.
Make treasure of tips msport ? who certainly has a lot of experience behind it.
Quote:
Originally Written by lupak
thanks for the advice lupak!
with the current map does not do any damage to try it as well, and you realize how it goes,for the rest I would say to re-map the fuel injection and the pedal giving a little bit of progression to climb,I have owned a jtd 115hp with a hundred scriptures and then I experienced on my skin,time, or do as I did,or you rely on a professional and then copy and systems to your liking.
thanks 1000! will follow your advice then I rifaro` alive with the modified map! hello msportQuote:
Originally Written by msport (exil77grande)
A hello to all!
put the mod file and golds of my alfa cos? we take a look, I changed a little everywhere, ignoring some of the map maybe this is not useful to me!!
I lowered the suitable and the rail, the torque of the turbo so just the one that I need to have a map soft!
if I made some map, be patient with me and kindly give me a hand to understand some things, e.g. how do I see what is in the press. rail and the bar of the turbo!?
I work only in 2d, with the table I'm working on that but I don't know how to read the how much, and how to make the changes .
thanks in advance to all...
No one is willing to give me a hand?
The rail to display it, by multiplying the value for 0.1 cos?cch? 13500 becomes 1350bar.
The turbo instead of the display in mbar, and expressed in absolute value = relative pressure + atmospheric pressure. For example, if you read 2350 knowing the atmospheric (typically around 980mbar) that the relative sar? 1,370 bar
thanks Sandro for having responded to me, have you taken a look at the mod?Quote:
Originally Written by SandroMarciano
if you have a diagnosis, go up and controlled the objectives with the "actual"..
hello joseph, and you believe I following your advice I can translate what that says to me the diagnosis!? I am not a professional and not cos? as good as many here in the forum, I have just started to understand something with the ecm and I need advice how to use it... it would not be pi? simple if anyone of you who has more? experience you watch a 2-minute mod and I translated the thing and too much, and what little changes in two lines? I have checked and re-checked the map after reading some topic about the edc 15 and following the advice of lupak! I noticed that I started too low with the changes! if someone explains to me how to map in both tabular and where you read the rpm?
or in 2D by increasing, for example, map the pedal how do I figure out how many rpm childbirth? thanks in advance to who ? willing to lose 5 minutes with me. good weekend to all
The Ecm on the X-axis always displays the load on the engine even if in reality? ? the other thing, personally I suggest you to use winols,
much more? professional and complete...then it's not? if there is a way to make people read the real axis to the ecm
If you find difficulty? to locate the maps, you can always look at the address from the driver in the ecm and search for them in winols..