Op-Com For the GM Group

Printable View

25-11-2012, 19:32
Poul77

Op-Com For the GM Group

I have been using for a long time, The op-Com
(a species of Tech2 usb)
This interface supports a variety of control unit:

Engine
Automatic transmission
ABS
Drivers
Air conditioning
Framework tools
Control unit chassis
And many other...

Support protocol CAN-BUS, and in the multiplexer automatically all the old protocols

Supports the drive OPEL from 1992 to 2012

Supports the reset SERVICE on Astra, Zafira, Corsa, Meriva, Tigra-B

Allows you to program the new keys in the immobilizer ( you need the CAR-PASS)
Cruise control, beautiful control and all units of the group Gm
OP-COM ? a diagnostic program based on PC.
It covers almost all Opel cars, even new cars with diagnostic system based on the CAN-BUS, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and the fault codes, shows you live data, lets make the test output, etc etc.
The program supports many unit? control, like engine, automatic transmission, ABS, sac, engine cooling module, instrument panel(Kontachilometri), the climate control,etc etc..
The diagnostic interface ? based on USB 2.0
The speed? of the communication over the USB-BUS ? enough to handle the speed? impressive systems on high speed? CAN-BUS ? currently 500kbps.
The Software in English and German, but is located in network a video to turn it all of the time in English
In addition, The software up to date ? available on the internet in many forums in the industry.

Hope this help....
Then, if you have any questions, just ask why? the s? to use very well...
Video demonstration:
http://www.youtube*****/watch?v=4j3PD8RHZkw
02-12-2012, 13:33
pinotec

thanks for the info poul , I took a bit of time ago but still never used it :) ,but as I will have occasion to use it, if I have problems I know who to ask :)
05-12-2012, 14:32
altipiani2000

Quote:

Originally Written by Poul77

I have been using for a long time, The op-Com
(a species of Tech2 usb)
This interface supports a variety of control unit:

Engine
Automatic transmission
ABS
Drivers
Air conditioning
Framework tools
Control unit chassis
And many other...

Support protocol CAN-BUS, and in the multiplexer automatically all the old protocols

Supports the drive OPEL from 1992 to 2012

Supports the reset SERVICE on Astra, Zafira, Corsa, Meriva, Tigra-B

Allows you to program the new keys in the immobilizer ( you need the CAR-PASS)
Cruise control, beautiful control and all units of the group Gm
OP-COM ? a diagnostic program based on PC.
It covers almost all Opel cars, even new cars with diagnostic system based on the CAN-BUS, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and the fault codes, shows you live data, lets make the test output, etc etc.
The program supports many unit? control, like engine, automatic transmission, ABS, sac, engine cooling module, instrument panel(Kontachilometri), the climate control,etc etc..
The diagnostic interface ? based on USB 2.0
The speed? of the communication over the USB-BUS ? enough to handle the speed? impressive systems on high speed? CAN-BUS ? currently 500kbps.
The Software in English and German, but is located in network a video to turn it all of the time in English
In addition, The software up to date ? available on the internet in many forums in the industry.

Hope this help....
Then, if you have any questions, just ask why? the s? to use very well...
Video demonstration:
http://www.youtube*****/watch?v=4j3PD8RHZkw

Hello, a information: I saw in trade a clone opcom on 50 euro ? suitable to connect to the new meriva? I purchased in September 2012. The cdb mutton which does not indicate the consumption in spite of the display you see in the background of the inscription km/l , I wanted to know if maybe with this you can? activate it. thanks.
05-12-2012, 17:11
msport (exil77grande)

Quote:

Originally Written by altipiani2000

Hello, a information: I saw in trade a clone opcom on 50 euro ? suitable to connect to the new meriva? I purchased in September 2012. The cdb mutton which does not indicate the consumption in spite of the display you see in the background of the inscription km/l , I wanted to know if maybe with this you can? activate it. thanks.

hello,I invite you to read the rules and introduce yourself in the appropriate section before asking.
31-08-2013, 21:15
toni85

Hi Paul do you know how to reset the lights on after an oil change diy.I have an opcom firmware 1.39.Thanks in advance.
17-10-2013, 16:53
rebirthafterrevenge

Guys but op com is there a version of the software in the Italian language?
18-10-2013, 01:03
ecutuningpro

I don't think ! I have the verasione in English.
18-10-2013, 22:48
claudio-abarth

but Op-com ? a program or an interface type to ELM?
19-10-2013, 12:50
rebirthafterrevenge

? an interface that works with its dedicated software!
19-04-2014, 21:26
che_guevara731

Hi everyone,I'm new in this group,I do not understand where should I submit x to make it short I am a guy(40), played in palermo ,are the holder of a ople tigra 1996,I bought the op-com to me ? was really useful,but I would like to know ,if you can change the values in the control unit on the minimum of my car,making a control with op-com I see that ? was calibrated a minimum of 900/950 rpm,I would like to know s? entering on the body and then get on the immobiliser,entering the code car pass,which unfortunately I do not keep,whether ? you can modify the parameters of the minimum of my car,thanks to all the/,has can you please tell me where I can submit?:confused:
20-04-2014, 01:05
klajdin
22-04-2014, 23:05
che_guevara731

c'? the translated version,can you? upload a video in this forum?
19-10-2014, 20:34
Pama

Quote:

Originally Written by Poul77

I have been using for a long time, The op-Com
(a species of Tech2 usb)
This interface supports a variety of color? control:

Supports the drive OPEL from 1992 to 2012

Allows you to program the new keys on?immobilizer ( you need the CAR-PASS)

..........................................
[/url]

I would like to program a new key on?immobilizer of my OPEL CORSA year 1996, I have the car pass, but some vendetori of the OP COM, they informed me that not all of the chinese clones may be able to do it.

Around the world you have already? run this operation, and with which device?
Thank you
19-10-2014, 20:51
rebirthafterrevenge

Do this without any problems ! I have made a lot of corsa 1.2 petrol and also astra and zafira! with the carpass do it all.. you'll see that it works
19-10-2014, 21:52
Pama

Quote:

Originally Written by rebirthafterrevenge

Do this without any problems ! I have made a lot of corsa 1.2 petrol and also astra and zafira! with the carpass do it all.. you'll see that it works

Reading network recommend the recent model v. 5 with PIC18F458, can you tell me if it would be fit for my car of 1996?

There is a guide on the procedure of programming, immobilizer key?
30-10-2014, 06:53
Pama

Quote:

Originally Written by che_guevara731

--------------------------------
are the owner of a ople tigra 1996,I bought the op-com ...................................
:confused:

surely we have the same ecu....,I would like to duplicate a key engine immobiliser,could you tell me if your op-com has the mode? to do it?
which model ??

thanks
30-10-2014, 19:58
alien78

Quote:

Originally Written by rebirthafterrevenge

? an interface that works with its dedicated software!

? an interface with dedicated software, the clone costs about 20?......
30-10-2014, 21:03
alex68

the other versions do not have the Italian language.
alex210392

Hi I have a problem with OPCOM, I would like to activate it on a corsa C the clock in the display kilometers and through guides on youtube specifies that you need to edit in the hex file inside the eprom framework tools by downloading them with opcom, since here all ok, but as soon as I give the command read to me crashes the program, tried it on different laptops and the result is the same, someone that is successful or at least that was in my same situation and has solved it?