opinion remapping done by an expert on the alfa 147 1.9mjet 150cv

kids today, a friend and co-worker make the service files on-line told me that he wanted rimappassi a 147 1.9 mjet 150 hp that went badly,died strangely, and much more that I'm not here to point out,then I said, well, strange maps or incompetent I've seen it, but based on the symptoms that you say, you will have mechanical problems and does not depend on the map,at this point, the owner says that the original was fine and that the problem is born after the remap but him and is it safe to 100%, based on the fame of the remapper that does not depend on the map and I challenged him to go well and strong the machine after my remap at this point, made sure of my I said, if you wait 15 minutes I will send you the only map that I spent 17 minutes hehehe well, according to you, that you have seen the mod file of the previous remapper here posted how do you believe that it's over?
I am very well what he tried or wanted to do but without success, but to you the word that you think of it after you have seen the mod file?

remap paid 200€

the file ori, it's here in the data bank is the 533_727

http://www.professionalchiptuning.ne...hp?42-alfa-147

ahahahh msport this has made my nephew antonio student of the first grade ahahhhh...the thing creepy ? all of the management related to the turbo,not to mention the other, now I copy the increases ? the first is that I find I do the copy and paste and maybe will try? to do it with the driver, but the other file... you know, some, time, f?, bought the increments are beautiful and ready, and they did this, it s? who ? the great trainer? anyway you 17 minutes? but come on! he will be employed for at least 1 minute x this****work. ahahhhh
xch? does not create the forum for a almanac where to post the strange file x when we are sad and we need to make us a few laughs?

misa that he wanted to copy some of the curve of the 170cv.....

Quote:

---

Originally Written by giarras

ahahahh msport this has made my nephew antonio student of the first grade ahahhhh...the thing creepy ? all of the management related to the turbo,not to mention the other, now I copy the increases ? the first is that I find I do the copy and paste and maybe will try? to do it with the driver, but the other file... you know, some, time, f?, bought the increments are beautiful and ready, and they did this, it s? who ? the great trainer? anyway you 17 minutes? but come on! he will be employed for at least 1 minute x this****work. ahahhhh
xch? does not create the forum for a almanac where to post the strange file x when we are sad and we need to make us a few laughs?

---

you I'll gladly I'll open up a section where you post strange file type this.

Hello Msport according to me, the good coach and has done a copy - paste from another map.
Very few increments turbo, and the rail without logic.
I have no doubt of the result with your map.

Quote:

---

Originally Written by pinotec

misa that he wanted to copy some of the curve of the 170cv.....

---

accurate according to me he wanted to do this, only that he copied also what you had to and then I say if the car is not good on and off as well to a minimum because deliver it?
it was really convinced.
however, the property owner, after having tried my remap still does not believe.

at this point, let him reload the map to the other trainer...so the machine is switched off, and him ? happy!

I don't understand I'm doing copy and paste of the increments...maybe wrong I but every map I make I always start from scratch, though ? a car that I have already? done and of which I have already? the mod

Also I provide service remapping on-line to others and believe me I happened to have maps, mods and other pseudo preparatory with the horrors within! the increments of pressure turbo windfall type 5 - 6 bar. increases rail pressure up to 800% limitatoi of smoke in the negative and, above all,on the contrary I would say often moved to the opposite.

Quote:

---

Originally Written by magi1984

at this point, let him reload the map to the other trainer...so the machine is switched off, and him ? happy!

I don't understand I'm doing copy and paste of the increments...maybe wrong I but every map I make I always start from scratch, though ? a car that I have already? done and of which I have already? the mod

---

magi c'? just to understand..believe me alcumi do so?, indeed,for many, the right method and the one adopted by you then you are not wrong.

according to me the real problem ? that most of these pseudo-mappers believe that you can? raffazzonare to the least worst map in 1 minute facedondosi pay unfairly for a piece of junk, but I for a map made with due care....
? a p? a defect in an all-Italian....the same capit? to me on many jobs of mechanics, e.g. made from "mechanical" for a ridiculous price in the best case, but then regularly you find that you are made to pay handsomely, and still then must be taken up and redone as you need to do as ? success in this case, the mapping rebuilt by msport....
on this you cannot escape certain things I believe that ? better to make as it must be otherwise ? better not to own.....only that those who think so? I am really in a few....
I have no way to see the map posted for pc problems but from your comments I understand that it must be a piece of junk unclean and offensive to the category...

that courage to place certain files in the ecu....
not to mention the price that instead of receiving the compensation had to give it to owns the car,
in the pi? should pay moral damages to the Bosch for the insult of the changes made to the C. D. C.

unfortunately I'm not able to express myself on the map
but ? a true delight to read your opinions

Can I take the opportunity to ask some questions on the map? I would like to know cos'? the curve at the address 1C1674? I see that has increased, but I am not able to interpret it...

Quote:

---

Originally Written by bart

I would like to know cos'? the curve at the address 1C1674?

---

Commonly called " map pedal

Thanks for the reply alfajtd! :)

I confirmed the axes of the above-mentioned map:
- X-Axis: Accelerator
- Y-axis: engine speed
- Azze Z: IQ

Thanks for the patience... :)

my compliments!!!!! without words..

Good evening to all .. I Am new and I would like to begin to understand something.. I Hear experts in the forum then surely my questions seem banalissime.. With that program you see/evaluate the various maps.. ??

Quote:

---

Originally Written by goku

Good evening to all .. I Am new and I would like to begin to understand something.. I Hear experts in the forum then surely my questions seem banalissime.. With that program you see/evaluate the various maps.. ??

---

you can view them with many sw among these, the most known are the ecm 2001,ecm titanium,map 3d,winols etc.
ps: closed off the topic.

And fun to see this map in 2d. I like the drawings of my son when he was 2 years old.

you're shocked for that? look at this!

Quote:

---

Originally Written by eismann

you're shocked for that? look at this!

---

the legendary, the torque limiter after 883.02% titanium ago sdo and does not mark most of the increase to where you found this science :cool:

bha !!! what's crazy!!

inside the ecu of a 147 bought used from my cousin, the owner sold it because? died, and thought that it was not the fault of the map, I saw that the preparer ? highly rated!!! that affaroneeee ;)

1D8268, ? a limiter boys?
Cmq Has touched only certain things, leaving many others, or am I wrong? Advances not to touch them...?

Quote:

---

Originally Written by Danny

1D8268, ? a limiter boys?
Cmq Has touched only certain things, leaving many others, or am I wrong? Advances not to touch them...?

---

not ? always have to touch everything, often the advance payments you can also leave ori...

You, certainly, but it seems to me we have not only left those ori....But even so...then Going to anfetaminizzare limiter :Or

this map is indecipherable, however, here there and it stinks, according to me, the owner is not telling the truth, one that the map is so not the ability to make a map right, and so how does it work and say that it is a mapper?

guys how do I download the file for me 2 laughter ? I have to wait for a few days that I just registered ?

Quote:

---

Originally Written by ecusport

guys how do I download the file for me 2 laughter ? I have to wait for a few days that I just registered ?

---

you have to wait for the achievement of 80 messages useful ? everything written on the regulation.

good files