port BDM

Printable View

ugoboss

port BDM

Hello, I ask you an information if it is possible, a colleague has connected to the flat on the e xxx spring-on the contrary, and has tried to lleggere the ecu, with the result that he has not read anything and now putting the flat from the right do not communicate any more, and throw up in the car, the machine quietly, so I guess it skipped the port BDM , someone has some info if you can and how to possibly repair the port BDM or if there another way of making connections, the ecu is edc16c39 fiat group, thanks.
salvatoreragonese

Quote:

Originally Written by ugoboss

Hello, I ask you an information if it is possible, a colleague has connected to the flat on the e xxx spring-on the contrary, and has tried to lleggere the ecu, with the result that he has not read anything and now putting the flat from the right do not communicate any more, and throw up in the car, the machine quietly, so I guess it skipped the port BDM , someone has some info if you can and how to possibly repair the port BDM or if there another way of making connections, the ecu is edc16c39 fiat group, thanks.

hello Ugo has tried to read another ecu maybe after he made this inversion is needed for some track on e xxx and is not visible to the eye?
ugoboss

hello, you have tried and it all works well, I know that jump something on the ecu, there are the type of fuses but the ones I checked in I are in place.
salvatoreragonese

You should check continuity of any track but to be honest I wouldn't know where to start let us know if you have any update good morning
micheleyr6

Quote:

Originally Written by ugoboss

Hello, I ask you an information if it is possible, a colleague has connected to the flat on the e xxx spring-on the contrary, and has tried to lleggere the ecu, with the result that he has not read anything and now putting the flat from the right do not communicate any more, and throw up in the car, the machine quietly, so I guess it skipped the port BDM , someone has some info if you can and how to possibly repair the port BDM or if there another way of making connections, the ecu is edc16c39 fiat group, thanks.

it's been a long time since this post...but I will try,a curiosity,but the ecu was powered by a bdm or comb?
ugoboss

hello, is powered only via e xxx, no comb.
micheleyr6

understood...that's why..it was lucky that it jumped the ecu..
I l the food is always to comb the bosch for pararmi the ****..
but then you know if it resolved?
ugoboss

no not solved, but explain to me why you equal the c*lo if the establishments from the comb, and what do you do deadlifts in the power supply from the e xxx spring? I believe that if you put the e xxx spring to the reverse port bdm jumps however, even if food from the comb.
micheleyr6

is the e xxx I connect it only to the port of the cock...and the power the do from the comb...
so if you mess up certain that you do not skip it because the 12 volt does not come reversed to the micro..I don't know if I was clear
sisco

Quote:

Originally Written by micheleyr6

is the e xxx I connect it only to the port of the cock...and the power the do from the comb...
so if you mess up certain that you do not skip it because the 12 volt does not come reversed to the micro..I don't know if I was clear

hello micheleyr6, I would like to understand well, always put in the middle between the rooster and the port bdm adapter (the one with the red led and switch so to speak), but not the food? or the adapter is not put?
micheleyr6

of course in the midst of always the adapter...but instead of feeding from the adapter food from the comb...
if you check with the tester on the positive and negative from the bdm with the comb they have continuity...
sisco

ok thanks for the response