Bmw 330D E46 2001 automatic error Ecm titanium

Hello to tt.
I read a 330D with the old Bosch K-line 4.0 pre restyling 187cv 2001.
Well I have it but the original map. Then launch ecm titanium I select Bmw 3 series 3.0 TD 187cv 0.804 to memory the code.
The Ecm at this point it tells me unable to use the selected driver. The driver contains errors... How do I proceed?
My 320D l I read it ? written without problems, but the ******* restyling with the ECM16...

Use X to read and write the ECU Mpps v13 original alientech NO clone. Therefore the hw I'm looking for.

Open the file with winols you will find the maps you are interested in scrolling through the file you modify recalculates the checksum and write

Do you have a link to wintool? With the Mpps me it was given to Ecm titanium and mps

Quote:

---

Originally Written by Fabiuz

Do you have a link to wintool? With the Mpps me it was given to Ecm titanium and mps

---

If this is the first that you do, I strongly recommend having someone with a pi? experience

These are the first maps that I make it.
However, I would like to understand what causes error I'm in the opening of the driver. And how to solve it. Thank you in advance.

Quote:

---

Originally Written by Fabiuz

These are the first maps that I make it.
However, I would like to understand what causes error I'm in the opening of the driver. And how to solve it. Thank you in advance.

---

Sure to selected the wrong driver..
e-mail the file to see what it is..

Place the reading? I rely on the data eprom X choose the driver that would be the first of the 330D available in the 4.0 final

but you recognize the driver automatically?

Then, automatically, I do not find any compatible driver for ECM Titanium, but this was also with my 320D, chose in the drivers hand and complying with the last digits of the unit and everything is ok.
I select then the BMW 3-Series and start the search, order and reorder by name, I turn and reach for the driver files that you see above the error below:
[img]http://oi59.tinypic*****/o8fod0.jpg[/img]
And I'm attaching the original reading is made with MPPS:
Boh I don't know what to do.

If I run the same procedure, manual selection of the driver with my reading 320D arrival here without problems:
[img]http://oi57.tinypic*****/2wq63w7.jpg[/img]
so yes, I am afraid that in the driver 330D there is some error with the EDC15.....
I have the EDC16 and goes a love... restyling...

Wow..
all the software that I have damage to driver error..
except Winols he recognizes it to perfection..
what can I say? it will be a bug of the driver with this software 1037351513..