the council mapping

Hi everyone I would like some advice on how to give the right increments on a grande punto 75 hp..with fap....I know that you can't? overdo it otherwise problems to fap...that little push in the pi?..where I can act....thanks

Pu? suffice touching only the limiters..exclusion egr...I saw that I have to work only in 2d, why? I don't have the drivers for ecm titanium...but not ? a problem

Quote:

---

Originally Written by max75

Pu? suffice touching only the limiters..exclusion egr...I saw that I have to work only in 2d, why? I don't have the drivers for ecm titanium...but not ? a problem

---

Hello it doesn't matter that the car has a DPF, you can get the same great results.. on the inj-time stay with a percentage of 8% on the entire map, the rest you can do as you wish

Thanks.
I've reassured. ..

Quote:

---

Originally Written by Backgroop

Hello it doesn't matter that the car has a DPF, you can get the same great results.. on the inj-time stay with a percentage of 8% on the entire map, the rest you can do as you wish

---

Change of 8% across the map of the injection times, I find one thing very wrong. Indeed, on these ecu injection times may be left in the original if you do not have turbo plus.

Quote:

---

Originally Written by jacktheripper2

Change of 8% across the map of the injection times, I find one thing very wrong. Indeed, on these ecu injection times may be left in the original if you do not have turbo plus.

---

Of course, you can keep the original, by changing other things in the map, can you? increase the amount? fuel injected, keeping the original times, wrong what c'? according to you?

That modifying them without looking up the references, the control unit does not know? never the real deal? injected.

Quote:

---

Originally Written by jacktheripper2

That modifying them without looking up the references, the control unit does not know? never the real deal? injected.

---

you pi? clear as references, do you mean the break?

You exact. Without raising the break point the ecu is not what happened? never the real deal? injected. In addition, since the injection is longer than the end of the same sar? the further from tdc, and then the consumption will be higher, but why? the ecu take? as a reference the advance for a certain amount? and in truth? ? more to the change being made at the time without changing the axis. Instead of leaving the original times, or changing the axis the controller will go? also, to get the right reference to the advance thus leaving consumption unchanged.

Quote:

---

Originally Written by jacktheripper2

You exact. Without raising the break point the ecu is not what happened? never the real deal? injected. In addition, since the injection is longer than the end of the same sar? the further from tdc, and then the consumption will be higher, but why? the ecu take? as a reference the advance for a certain amount? and in truth? ? more to the change being made at the time without changing the axis. Instead of leaving the original times, or changing the axis the controller will go? also, to get the right reference to the advance thus leaving consumption unchanged.

---

Your reasoning ? correct, but this is for a map soft where you want to play on the consumption