Marelli 5NF.T1 Fiat Stilo 1.6

Hi guys,
an acquaintance of mine brought me this unit.
It seems that on the drive where it was installed a nice day, it started to give trouble with the CODE.
To this end, they have decided to scodificarla.
Now, the scodifica has made a person who does not know, but I have the files ori and what is loaded.
By comparing with that of the database of the forum seems to be well made, so I expect it to work properly.
instead the car every so often not because of the code, with all that has a scodifica total.
Once scodificata the ecu, it is necessary for the case to cut some wire, disconnect transponder or the other? Why? he doesn't have to do anything

No...you try to put in motion without a transponder, if you mean the car ? 99% scodificata total, otherwise there are problems....

ok, let's do some testing.
possibly, what kind of problems? advise me what to check?
I have the ecu here and I'm going to review the various welds since? to open it, and scodificarla ? was almost completely welded...

the sin that was welded as with the right equipment, don't even need to open it, I don't ever open

what equipment do you use?

Yes, you just plug from the connectors..***** o do it before the proof of the key...

Quote:

---

Originally Written by zioweb

what equipment do you use?

---

encode, but is much more

Quote:

---

Originally Written by redline

encode, but is much more

---

interesting, is it expensive? you know tell me some info on the manufacturer, etc.?

Quote:

---

Originally Written by zioweb

interesting, is it expensive? you know tell me some info on the manufacturer, etc.?

---

I don't know if here on the forum I can give you info maybe moderated message

I don't know if I'm dumb, but I can not send it... moderated message