Printable View
Hi all, I have a Zafira a relative of mine that when I try to interface with Mpps x a read only by EcuId tells me internal Hardware Error and does nothing I have tried on 2 zafira and on both I have had this prob. The mpps works because then I wrote a brera without problems.
The machine ? a Zafira 2008 1.9 cdti 120 hp. I Think Edc16c39.
Anyone have any idea why in the list of cars ? marked this car
edc16c9 it should be, and if and only reading and I don't know mpps if the protocol flaw in bdm
hanzi excuse I have seen protocols and test edc16c9 if you identify
mpps reads only a part of the file ori better bdm or find the file ori modify it and write not with mpps
I confirm what was written by cicciogsr if it was edc16c39 only reads the data, while if it is edc16c9 can only write it then or you get the gold and the write or you do it in the bdm.
I with mpps I read and written to? only a part of the file of course does not ? a job well done because? you cannot set all of the management...
ok thanks for the info but without the ecu id, the program of the mpps do not enable the chance? writing on mpps, or am I wrong??
the flaw in the bdm and you don't make mistakes for sure,because if the mpps can't get the id nn you can do the writing.
thank you for the info resolved, making it the bdm. Thanks
Sorry for the ignorance from beginner. I have to help a friend defappare its zafira 1.9 150hp mounted ecu with these codes 0281014024 55205622 14100370 and MPPS v13 that I have available, I end up not even ID (crashes to clean up errors DTC) . Seen now, in fact, that recommended in many of it in the BDM. this means you have to provide precisely the hw Bdm 100 or 1255 or even with the cock e.g.,? And with the kess v2 clone but it is only from the obd? THANKS