I forgot, here is the ecuID
Opel Vin Number : 00000000000000000
Marelli Hawdware Number : MAG 01246O204L
Marelli Software Number : 3376Y251
Opel Hardware Number : 33920-72KQ1
Programming Date 16/06/2008
Printable View
I forgot, here is the ecuID
Opel Vin Number : 00000000000000000
Marelli Hawdware Number : MAG 01246O204L
Marelli Software Number : 3376Y251
Opel Hardware Number : 33920-72KQ1
Programming Date 16/06/2008
Address 013900, ? the injection choked? Not ? equal to that of the 90 hp, but ? the only thing "similar" there I found....
Guys here is the file from 2mb. Then, I started from the rail pressure, which should be the address 08F4CF. I have touched only this just to see how it does. %increments ? too much, too little? Another thing; a Little more? next c'? another similar map, which differs soprartutto for the initial part, ? the limiter relative to the pressure in the rail?
Guys, little question!
The checksum of the file on the network ? of course, different from mine. Mpps has a standard driver for the swift, no distinction between 69 and 75...The fixes anyway?
if you connect the instrument to the usb and select the make and model and protocol, there is written whether or not to calculate the ck automatically.
Yes, the doubt ? why? by a single protocol for both 69 to 75. It's the same? I would not like to face a mess..
don't get complex if there is written it does both, and if it is the same protocol that is the same csa for the two of them otherwise, there were two different.
Ok Ok :) Thanks Msport!