I can not read the edc15p

I can not see the pinout unfortunately :( anyway, with the rooster on your marks fw84 on what car you have tried over the edc15?

discussion cleaned up, if we talk about other ecu there is confusion

I v53 and v54 I read I write edc15p by obd

Typically use much more than fgtech.. Now thinking about it with some of the tools I think you should remove the fuse for the dash that problems..this not the I ever tried to tell the truth?..

With mpps v5 read and write easily without even removing the fuse 11, although the tool tell me to do it. With gallo v48 and v54 can't get in.

PS: in MPPS imposed passat 2.5 tdi edc 15p, even if I have to do the 1.9.

Hello the MPPS serves as a good, and cheap ... 29 euro and goes the fear

none of you happened to still be on the car post 2002, the mpps once the law up to 70% then the ecu is not found and another time manco part to read?

tried it on the above car, also the v54 and the result is identical..only managed it once to read it in mode low with the mpps.
probably the obd is disturbed..in sti cases, the only way is to have it in the boot right?

Excuse me meddling, but you want to read the EDC15p from the obd before 2004

if you have a AM29F400-800 the you read by OBD or in Boot Mode without problems, but and a EDC15C..

if they have 2 27C010 PLCC, you need to unsolder and read with a special programmer in the bench.. no OBD or boot mode...

Annex 10129
Attachment 10128