Problem reading edc15c7

sorry I add one more thing
of course, the car was attached to a battery charger and the cock v54 I tried to use it with both the power supply and the voltage reading was always of 13.5
with the Kess gave a 12.7.

ok, in this case, definitely do not read from a serial to a problem of recognition code, smontala and remove the e2p and then read the counter.

thanks Ugoboss
helpful as always!!!!

Quote:

---

Originally Written by ugoboss

keep this is great, unzip it and use it.

---

I read it finally in the boot it can be seen from the e2p
the problem is that when I go to correct the checksum with your program and try to rewrite the ecu it gives me checksum error
I always speak of the cock v54...help...:)

if you can mail the file ori and mod them in control, in each case that the program is not wrong, the problem ? elsewhere.

Graz ie Ugoboss
Here are the files ori and mod
I await instructions

The mod I also tried to open it with the Ecm and save it, but nothing... When I write with galletto I d? always checksum error....

Sorry I didn't put the references in HW and sw
846-965
Fiat punto 2001 85cv 1.9 jtd

Hello to open it with the ECM you mean you have corrected and saved the cks?

your file does not have the cks right , try this.