Experience Drakebox2

Another thing, additional forms ? the fact that ? physically visible. In fact, 4 years ago, that I had a bmw E60 sedan, I have checked with the mirror on the motor (and then maybe trying another but ? the only reason I found it myself)

hello hello, I am antonio new writing. I also have the same problem you had you and I'm intrigued ,how did you solved the problem?what is the module that you purchased, I would like to buy I also(I hope that doesn't go against the rules of the site). I would be grateful for your response and then you'll know . thanks

Quote:

---

Originally Written by Mazzu

The story of my personal experience made in Germany with the said control unit mounted on a Audi A4 tdi 170 bhp common rail of 2010.
Just got the mount in 30 seconds and try the various steps of the increase in rail pressure that is set using a button on the inside of the controller (0 to 9), I start with the step 7, the graft second, and thrust the throttle, arrived at 3800 rpm it goes into recovery and I do notice a slight improvement in the shot but nothing. I stop and power back up, try the 6, get to 3800, and the power supply is cut as if the audience were in limiter, but does not enter recovery. I try to 5, the same thing, but it does 4000/4100, I try to 4 ditto at 4300/4400. At the end arriving at 3 am, the car pulls well up to 5000 but...pretty much as it was originally. I decide to return the unit to Drekebox explaining that in fact, in my case, it doesn't give any advantage, the company replied that not c'? the problem and return it. The day after I get an idea, and if you find a unit that only handles the pressure of the turbo, via the MAP sensor, in combination with the Drake maybe everything might appear to work (pi? diesel but also pi? the air!). I try to go around the ecu for my car and search and search...I find it in England !. I do a few question to the company and they tell me that they have the special wiring for my car and according to them, in combination with a control unit rail should give good results. I will buy it, after a few days got the package and the weekend immediately after the horsemanship. Has 8 steps (1-8) with the dip switch, I put it on maximum, and I try to set the Drakebox out of 5. Result: very good, the progression ? very sensitive, nothing to do with the first. I try directly 7 excellent, and better still, the power supply is not cut-and-sensibility? on the accelerator ? very different, it seems to kind of have the pedal booster, while before it was laid-back below.
I try to 9 the Drake (the maximum) but it goes into recovery, I try to 8 but size 4400, to put back 7 and it's fine. Now for me the setting ? ok.
Now I just have to try it for good.

---

ciaosono antonio de liso from naples I have the same problem you had that you rev up with the drake turns on me the light of the glow plugs, and then goes into error turn off and power back up the framework everything is ok but if I pull it ripresenta. could you tell me from which site you bought the other ecu and how it is called? this is because those of drake I have never responded except that when I purchased the selected I would be really grateful ,I would not have wasted 100 euro avail. thank you in advance and I look forward to your prompt response . thanks and regards atuuti members

x, the user mulazzone,please read the rules and introduce yourself in the appropriate section before entering the house of others, and ask questions,I thank you in advance.

hello, I apologize if I seemed to not really relevant to the rules I want to introduce myself but I've tried on this site are not able to find the section where a new member may introducing himself. I would need help as this is the first time that I subscribe to a forum and a site like this (very interesting) . thanks for your help

Quote:

---

Originally Written by mulazzone

hello, I apologize if I seemed to not really relevant to the rules I want to introduce myself but I've tried on this site are not able to find the section where a new member may introducing himself. I would need help as this is the first time that I subscribe to a forum and a site like this (very interesting) . thanks for your help

---

if you go on the main page, find the section presentations,inside then there are the various discussions that have been opened by the users,in the top left, you will see the icon to open a new discussion, and so you can do the whole thing.

I also bought a module

I watched him to the maximum on the c3, however, gave problems

it was built in the same company drake box

I don't remember the name