Who and Salerno-Naples and can help me fix my BDM?

no, the led does not turn on lights when you go to read!!!where are you from???

Quote:

---

Originally Written by special

I give you an example.. then if I connect the bdm to the pc and the food bdm with its power supply, the green led should light up right? I have to say that the bdm and as new as he is never connected to any ecu..

---

I have already? the file to program the micro..

I can not say if the cable you have you can you? maybe it is, I use xprog and the upa for the various micro

Quote:

---

Originally Written by carlo abarth

no, the led does not turn on lights when you go to read!!!where are you from???

---

are rovigo, veneto

I thought a lot more down!! if not, you helped me!!

Quote:

---

Originally Written by special

are rovigo, veneto

---

Quote:

---

Originally Written by carlo abarth

I thought a lot more down!! if not, you helped me!!

---

thank you very much dear.. I would like to learn how to flash these micro

Quote:

---

Originally Written by giuseppe1374

hello, I would like to help? unfortunately, as none of the two privileges to upload/download I don't know how to do it maybe someone else can? it will help you?

---

you don't need any privilege to upload on the forum.

thanks daniel, I found out after, but now I think I've solved the problem:o

I resume this old discussion because? I think I have the same problem.
I can not let go of a BDM100 in any way. Windows sees it as "FTDI <-> Serial converter"
I tried to use MProg, but I can't find the parameters to taste. Could someone send me the file for the EPT?
All the software and executables that should do the upgrade of the firmware does not detect the device and give error "Error opening device."
I've tried both "flash_bdm.exe" that the various executables "1.exe" and "2.exe"
I have a Willem ? need to reprogram the various eprom.
Thanks to anyone give me a tip!!