I have to put ori the rail why? incompatible with the mod that I have recommended,or the xk? x you do not make sense?
Printable View
I have to put ori the rail why? incompatible with the mod that I have recommended,or the xk? x you do not make sense?
the rail is to be modified in certain occasions and with knowledge of the cause.. for the moment, let him ori and its limiters..
for? first they told me that I had done well in the rail, do you not ? done well?
throw percentage in a map and say that ? done well, according to me don't you ? understand something..
however, each process in its own way..
Then we start to use a bit of logic.. if umenti the rail of the 5 % you have to automatically increase its limiters of 5 %. (this you have not already done so).
yes, I made both limiters, to tell you the truth, I followed step by step the guide found here on the forum, it was for the edc15 but also goes for the 16 in fact, I found the same curves, and the same limiters....maybe you have the wrong file, t? enter the other(I'm kidding).
aahhh..that is..who knows which file I had sent!!!
if you need to send me something, ask first to the moderators, I don't want the responsibility of shares to true.
now look 50
I arrived to 60!!!!!
I was 110 before the crime, but then, now you can download the most recent that I had postedQuote:
Originally Written by Chris156
I've downloaded... you have only changed the turbo and the rail.. also modify the time.
Ps: up in the correct manner, the limiters of the rail..
I can indicate where I am wrong? I followed along a guide, for? I will? missed something in qst point.Quote:
Originally Written by Chris156
but did you try the map? a list of what you have changed and how..
Certain that I tried it and it goes better for you? not that it's much better,feels that the nn ? as before, anyway I have changed the prex turbo, prex, rail, torque limiter, torque required, now ? for a while that I've made and I remember the percentages, but at the beginning someone had told me that I was wrong, of course you knew but I just wanted gainers much.
Change the times and see that it will much more!!!
ok I have just a little time I try, first? the place cos? let's see if I don't do damage.
but do you want the prepare I a map for example? you have to mod a few things.. and you will see that is so.
I said, I have the pleasure of learning, I know that with the money you can? get it all for? nn you learn nothing, thanks all the same, if some time I would be the idea of buying terr? into consideration.
Here we go again... you see that I wrote that you prepare a map for example..I don't want to sell anything.. now you make me ban again!!!! :D
Anyway, prepare, and put it..
I would like to break a lance in favor of chris156 ..***** and he says you will learn with the tests .. and with the diagnosis .. buying a file, you can avoid the shaking, but you won't know anything
Really I said it that I learn the maps ready, anyway, cris, sorry I got it wrong, prepare, and I hope that it does not serve only to meQuote:
Originally Written by cicciogsr
It is true, but if you don't understand anything a risk of making serious damage in this way. Serving all of and 2 according to me.Quote:
Originally Written by cicciogsr
exact as you do with tests and diagnosis to do tests if you do not have a base.Quote:
Originally Written by dvdtuning
but ? normal ecm makes me see the timing of injection, in bars|mm3/inj?
you ? exact
I have not seen your map, but the time of inj on my edc16 are defined by the x-axis, mm3), and the y-axis prex in the rail bar and the result ? in microseconds.Quote:
Originally Written by andreap
I didn't know where to start to mod the injection timing, I have tried cos?, in the meantime, I mod a limiter rail outside driver, them check both please?
I forgot the file
I saw the map.. for the purposes of performance of not ? the maximum.. times give 5% so not so much sense.. the rail I would put it ori.. if tonight I'll sketch a map (old-style) and try..
You have the fap active? how many miles do you have?
my ? without fap, 130000km, so I know the times I don't know in the slightest what criteria to intervene, I don't know what it means to that map, but that map can you? do damage, according to you, how many hp it takes, I do not want to + 10-15
As promised, here is the file.. there are a thousand ways to map to the old style..at the end you're just tricking the ecu, and I honestly don't agree,but...patience..I have been following your way of mapping not to be confused with the ideas.. give it a try and see how it goes'!!!
Ps: enjoy your Alfa!!!
I didn't understand it...anyway thanks for the map.Quote:
Originally Written by Chris156
comments of the 5 people that have downloaded?I did not understand the map phase
the maps of the injection phase I would leave them for now, the original...
as well as the limiter in first gear
for the rest, give it a try...
instead of asking for comments if you did right or wrong to ask to the person concerned of the various changes
if you want to know how to... if you want to look for to ensure you then for your car...
you have already said that there are several ways to change it... but only one ? correct....
but without proper documentation ? impossible....
the map for me ? try it I'm curious of the results obtained... the logic c'? many things I agree with, others not...I would try myself but I don't have that car..
unfortunately, the type of map that you want not the postero' ever.. this ? a map according to the demands of ecuboost.. ? all calculated to have, for example, 4000giri the injection that ends at 1? after about pms, etc, etc...
just try it..
? normal that is not allowed? post the map as he does the work, I did not understand the maps of the phase, but as soon as I have 2 minutes I feel like I've figured out the "enjoy your alpha"...
those maps are on the advance injection..
I am a' yet another motorist shameless!!! But I saw that the map was a good!!! at the end of the mountains, the same engine!!! Sorry!!!
to cpt seemed to me an outlet ingiro:-) anyway, it should be emphasized here that not horsemanship I the same engine, but the alpha assemble my engine:-) :-)
anyway, how many hp do you think that you earn with that map?indicatively,
we are in the same family!!!!! for? like all families c'? who comes out the most beautiful!!!!!
Now I'm at work, but I gave 10mm3 about injection more.. you simply have to try it and see if you like it.. I am doing work on the engine with the same tolerances as the original.. unfortunately I do not know how is the clutch and I don't know how far we can go.. then take a look at the consumption and let me know!!! ;)