Lock ECU EDC16C35

I can try again even if it is not more ID the ECU?

Ps: for the BDM which tool you advise me?

You can try the same.....
BDM, you can take a BDM100, galletto or ktag.

With the ktag I just need to solder? Just buy or get a template?

If you have the jig and related schedule, no need to solder.

Could you send a link where I can find the coupons right to my ECU?

From regulation are prohibited links to shop external.
Contact the staff of the forum and you will know how to help.

Hello, let it be the bmw diagnosis etc listen to the advice plug your ecu in bdm and write only the flash the complete original and do not touch the other, you'll see that again, bdm 100 gallo or ktag go well. Greetings.

The flash the complete original doesn't.

Thank you for the answers,
So I bought the ktag with dima and its schedule in the spring(will arrive in the new week).
Now, however, I wanted to know how do I connect the regular spring and what should I do on the ktag because from some pictures I saw on the Internet with the ktag is the backup of the flash, e2prom and of the micro-and obviously the recovery.
Consider that I have made with the kess v2 to read a total of more ID.
Some users have told me to reconstruct/the file, but how do I make this reconstruction?

With regard to the diagnostics for BMW, I would say that is essential, for BMW, there are many useful functions including the alignment of the control units (DDE DME CAS EWS) that are used to start the car under certain conditions, not to mention the calibration of the injectors and the integrated data logger

are you sure that the picture is turned on completely?Because on the bmw it happens that you do not turn on completely and then give a write problems,I have always been careful and I've done without problems, but to a friend that happened I told him that I try to switch on completely the framework by holding the button for more than a few seconds without pressing the pedals,after a while you leave and lights up the picture with all the lights,try to rewrite it in recovery and it should go...