perhaps you will do attention to the connections to do, you may need to lift some pins (I'm not sure) but, I don't think you'll have problems with this type of uC
Printable View
perhaps you will do attention to the connections to do, you may need to lift some pins (I'm not sure) but, I don't think you'll have problems with this type of uC
the other most common scodifiche they are quite? the full version with the schedule coast however, not eralsoftQuote:
Originally Written by albertoS4
I've used it on hc912 to clone the EEprom, I rpovato all the micro that the upa supports clearly....
in regard to the schedule, as I said in some previous post, you should attrezzarti with a nice kit of crocodiles/ pinzettine to draw the pins from the micro.
I usually prefer to use the crocodiles and solder a soft cable on the different pin of the micro to get to the crocodiles
I am fine as well... also because often the read errors are also due to the contacts not just perfect between the upa and micro
the obvious one....maybe you have tried something that doesQuote:
Originally Written by albertoS4
you need to a single thing, or we often work with these facilities?
I have nothing nn working right now with the upa, I have read the ATMEL, MICRICHIP PIC and EEPROM standalone
when was not or cie was to lift the pin from the pitches of the pc or I connected bad I
for now, a one-time....Quote:
Originally Written by albertoS4