Problem saab 9.3 1.9 ttid. HW 0281015212 SW 1037393448

for me it depends on the files being read, but just from the ecu that is broken, if you want to take away the doubt,with the ecu and the car goes into motion given that you have to read the ecu to do the work,take the backup of the ecu new, and write in the old one,the mountains, and see if it starts the car.........if you are not part of the ecu went,if you party then the problem of corrupt files

Quote:

---

Originally Written by Omt

Not part of the starter. By placing the key the ignition is switched on but appears to be inoperative anti-skid, the starter motor does not turn. As if it were detached. That is usually the insert key is to set the TAC and then to the starter motor

---

Is an ecu identical and scodifca the e2prom and you'll see that part is definitely a problem in the ecu possibly, indeed almost certainly, whether this defect you made only after having removed the ecu maybe in the open it inadvertently you have damaged some transistors etc etc also selegge and writes in bdm to the times does not mean that the ecu is intact....