KESS V2 MY works 100%

thanks ecuprom as soon as possible we will try this mod

thanks, even if I still don't have the kess, now we are waiting someone doing the edit and test.

I hope that help your Kess v2 to operate the line K.
This pi? that tested and it works. The line value 12v K works with the protocol below.
-70% Of the supply voltage for the data to be sent.
-30% Of the voltage for the data received.

Quote:

---

Originally Written by ecuprom

The v2 24v kess pu? work without any problem. With this change you will see? that the K-line diagnosis works perfectly.

---

ecuprom I did not understand ,with this change, the v2 clone can also work on 24v? or only the original works at 24v?

? can work without problems with 24v.
But if you have not enabled protocols truck, that the use 24v?

If you look at the power tab kess pu? support up to 30v, but ? fully protected subsided to work after the meal, that ? 5V board microcontroller, as an entire work.

Photos of the line integrated load KL and Can Bus

We are all excited!!! Thank you in advance on behalf of all if you want to share

Thanks to all of you.
Now I put the video that I do the ecu with Kess

ecuprom I can not see where to solder the leads of the diode