Originally Written by
matteosr
About 70 bhp ecu ? the 6jf and read out in serial from a file to 448-kB on 75/90 hp the ecu ? the 6f3 or 8fxx, and read out in serial from a file that is 2.5 MB, and bdm from the files of the flash m58bw016 2048 KB ir? the files of the micro 516 KB, and the file of eeprom, 4KB.
If the ecu ? a 6f3 or 8fxx and the k-line wired you can read it in serial, and the bed can? be written in the bdm (the reading takes a lot);
if you do not have the k-line wired and you have the galletto 2, f? the virtual read, i.e. if the cel has in its database d? the file directly without reading anything.
Different speech for the edc16, serial always read the file from 2 MB, but contains only the tables of the maps, not all of the content of the flash, so you can't write it with the bdm.
Be careful to write 6f3 with galletto 1260 or mpps, often hangs at 50% and plane of the eeprom.
