then to do it well, the delta serves me bdm at this point, should I take the cock v53 , there are to be welded of the schedule or am I wrong there are guides to do this
Printable View
then to do it well, the delta serves me bdm at this point, should I take the cock v53 , there are to be welded of the schedule or am I wrong there are guides to do this
If you go into the BDM you have to open the ecu and there sladare the schedule, yes.
Guide link BDM: in the cartela software (Documents) on the cd that you get with gallo v. 53, however, you have to be careful as the colleagues.
The EDC16C39 you can try to read from the OBD with any serial' the old cock 1260, MPPS, V53. and does not block anything, and if you go read the write as well.
Reading time 45min, write 1 or 2 min from the serial port.
Hello, I have the cable violet, but I don't know what it is used for . Someone knows for what
blue or purple may be a VAG Com KKL.Quote:
Originally Written by 159sportwagon
I have an old VAG Com still somewhere and blue...
thank you for the info but according to me not ? said that if you can read you can write and consider that most people have said, better to do that in the bdm the lancia deltaQuote:
Originally Written by chiptuning.cro
It is always better to do it in the BDM however, there's more work and takes more time, and if you're not handy, you can also do damage.Quote:
Originally Written by tonybiond
I up to now, all those ECU that I have done via OBD, and I'm pretty (100-150), if the I have read, I have also written without ever having problems, apart from any that I have resumed after the tour or with BDM.
The remedy there is always,' cause if something goes wrong in writing obd, almost, dyke-almost, always, you can rebuild the file after you open the ECU and read the file corroto by BDM.
It's up to you, because "playing" with the ECU, there's always the risk of doing damage in one way or the other.
But the delta of that year? Because on the pi? new obd ec who has had a few problems on this car. to me, the v48, I did not wanted to act, it seems to me was in 2011 with the v53 I have not tried
on some of the new EDC16C39 5.x they put a new processor that v53 could go, and if no obd, alora from the tour... here comes into play the' CAN-line. Some even' the BDM is not up-to-date not to be due to the new processor...Quote:
Originally Written by nox
You know the question to him made him understand that the tool needs!
I have to make a delta 2009 what do you say what do I have to use , but then the schedule that they come out with the bdm must be placed above the template, or to be welded