Suzuki Splash 1.3 DDIS

check the reading as a whole, and not tabbellare could be the problem

Quote:

---

Originally Written by legendaryslave

check the reading as a whole, and not tabbellare could be the problem

---

But that check is not only true for the programming? However, I tried both in a way, now in another, and the file has always the same size if the read protocol suzuki

Quote:

---

Originally Written by passion engines

Hello, for the Driver, double-check what you're doing with the tool, automatically, so you don't change anything on the cock, then the other thing Suzuki Splash and Opel Agila from 2008 onwards are identical, produced both by Suzuki with small differences of accessories and exterior finishes, mechanical and electronics are identical.........

---

Matthew, you're working on the 75 hp? continue to focus on this, the readings of the k-line read flash and micro together, instead of the readings can and in some cases virtual read reads the flash 2Mb......fifths the size of the file and do there? you want..........Returning to the suzuki splash ? only 75 hp, and only kline then the file read ? ok...........

in fact, in the software of the rooster indicates a read/write file from 448 kb
evidently mounts a 6jf, and not a 6f3 as I thought
not ? if you have a diagnosis?

Quote:

---

Originally Written by passion engines

Matthew, you're working on the 75 hp? continue to focus on this, the readings of the k-line read flash and micro together, instead of the readings can and in some cases virtual read reads the flash 2Mb......fifths the size of the file and do there? you want..........Returning to the suzuki splash ? only 75 hp, and only kline then the file read ? ok...........

---

Is the machine ? a 75 Hp, and in fact I read in the k line. However, following your advice, I cut the file up to 2 Mb, and in fact now quadra everything. Then I just riconcatenarlo and write it always in the k line, and should go right?

Quote:

---

Originally Written by Exelion1986

in fact, in the software of the rooster indicates a read/write file from 448 kb
evidently mounts a 6jf, and not a 6f3 as I thought
not ? if you have a diagnosis?

---

Maybe you meant to write the opposite? Mounts to a 6f3 anzik? a 6jf!! However, as the diagnosis I texa and autocom!

Well Matthew, proceed with the writing, with the classic safety precautions, pc power supply, and battery or power supply, booster or other battery with cables, prevention is better than cure.............

Perfect, thanks for the tips. :)

Quote:

---

Originally Written by Driver

Hello to all. Today I read a Suzuki Splash 1.3 DDIS 16V 75hp, with galletto V53.

The file ori resulting ? this: http://www.professionalchiptuning.ne...ash=#post89308

Possible that it is only 448 Kb and Titanium, I don't recognize?

---

I read the swift ddis in serial (I think it changes a little) by putting v on "flash" and "whole" in the program of the rooster