put the table errors the original and see the error that
Printable View
put the table errors the original and see the error that
test let us know
thanks.. I will try... but according to me.. the real problem is the map... because from the original + no egr + no dpf... not from recovery...
maybe.. and the map pedal... I don't have adequate the other..
test the file davidehfnos and see the error,then go ahead.
right now.. I'm back to the original.. + no dfp no egr no swirl... let's see if still have problems.....
I forgot... anyway.. to think of it... excluding map and luca stanca.. I think.. the high pressure pump...
guys.... now the car is original.. okay.. (no recovery)
I did however log... if you want to watch them.. and comment.. I would be grateful..
for what I understand (a little) pump high, pump low they are good... as for mass air flow sensor and pressure turbo.. not me square...
I attach the log..
were renamed in a hurry.. so don't do random names.... anyway... cccc.. and is the first... dddd... and zzzz is the last log..
the first and made the machine just turned on.. and the last and machine-made hot and with a mileage of about 4 to 5 km...
thank you in advance...
I forgot.... the log.. have been made with multiecuscan... and you can watch them.. and needs to be imported the file in the chart of the program...
Hello, I make a screen of the error I can not open your file
they are not errors... are real-time readings of the various parameters.
with ***********/multiecuscan... open the program.. at the top you will find the item chart..
do import... (cvs file), so you can see the parameters, objectives and real...