if it is written in the bdm reset the counterQuote:
Originally Written by checcosassu
Printable View
if it is written in the bdm reset the counterQuote:
Originally Written by checcosassu
a replacement ecu ? can?
if you change the data of the eeprom dissaldandola or by using the bdm you will not see anything..Quote:
Originally Written by checcosassu
otherwise, if when you remap a or do an upgrade in fiat (leaves traces programming the flash or m58 with a progrmmatore to the serial port as mpps; wing nut; mag).
Quiet me ? happened to me on a car with proprerio "unipropetario" the car is the following I think is a small error in reading.
Hello
Quote:
Originally Written by alberto.bf
uses another diagnosis..but I think that it is climbing ! take the ecu and see if ? was open!
the diagnosis of other cars says the km right with a small tolerance of error
well 3-4 % of tolerance ? a problem..Quote:
Originally Written by checcosassu
also I have noticed such a difference on some machines
I tried fiatecu scan on different cars:
alfa 147 2004 jtd km framework 113456km, fiat ecu scan 143798km
fiat grande punto 1.6 mjet..framework 81000, fiat ecu scan 79867 km
fiat punto 1.2 8v framework 107678km *********** 106548km
fiat punto 1.2 8v framework 123564km fiat ecuscan 136728km
in principle, we
ps all of the cars in question were mapped to the 2 point, the big point and the 147, except for the 147 was the n entry. of programming, in the 147 does not check the item no.reprogramming..sar? that is not supported or the other