MARELLI MJET impariamola!

It seems to me that you do not read what I write. .... :p

Quote:

---

Originally Written by sportknight

S? but being as high as the limit does not send the drive in recovery cine on the 70, I wanted to say this

It might serve only if you want to exceed 1700 bar.... I would not pump standard

---

But xk? then I can't go over the 1460 bar? Riecso to increase the rail to the medium, but not to tall...I Speak of a Swift, and with the 75hp.

Quote:

---

Originally Written by Danny

But xk? then I can't go over the 1460 bar? Riecso to increase the rail to the medium, but not to tall...I Speak of a Swift, and with the 75hp.

---

uhm...watch it seems to me that the swift has the same stuff 70cv...cmq, c'? definitely a block somewhere...but, who knows does not speak...

Of course am lucky it goes! :) I start going through the file gp 75 in comparison with that of my....Let's see if there cable something different :confused:

Swift again, guys, to find out what limits the rail to 1460 on the 75hp......!

Quote:

---

Originally Written by Backgroop

honestly, I do not seems to be a map, and to verify, on the 75hp and 90hp bit is located in the initial part of the map

Annex 6071

---

Back, to enlighten me? In the screen you posted for the 75hp and their limits, and I do not see the area of the map rail..here you say is right before...can you give me a screen please?

Quote:

---

Originally Written by Danny

Back, to enlighten me? In the screen you posted for the 75hp and their limits, and I do not see the area of the map rail..here you say is right before...can you give me a screen please?

---

Sn already? posted of the screen relative to the 75 and 90hp

But in the screen, between 75 and 90 does not change anything. I have the 75 and I will stop, however, at 1460

but you have made, the variation of the famous bit?

raga I have a problem with the turbo of this car, I climb a hair above the threshold of 2500 mbar, and then go in recoveri, should I review the turbo but since ? my I am looking for the restrictor of the turbo, to raise a pochinio c'? no one that knows where it is?