faber..I saw the screen, but this pc I don't have the programs to open the map...but what do you mean by "mirror"??do you mean that they are maps with reverse dilettura?
Printable View
faber..I saw the screen, but this pc I don't have the programs to open the map...but what do you mean by "mirror"??do you mean that they are maps with reverse dilettura?
views of the mirror ...
This one from you ? the injection split Map1 as it is called in the ecm already? spoken in the previous post is located at the address 0675beQuote:
Originally Written by faberecu
The address 64a02 ? a torque limiter as a function of temperature is not the center with the foot pedal in the screen earlier made by me with winols c'? the description and conversionQuote:
Originally Written by faberecu
ok correct the name.. it was what I meant anyway
but the rai and the limiters match ??
pity we can't see the attachments would also be useful to me to study this type of ecu....
Ok for the limiter rail, but there must be some other thing. While raising the "ladder", not salt the maximum pressure, in addition to the 1480 bar, it's enough if you stay with the pmpa rail ori, but they are not enough if you want to go further with the processing. If you took the pump 90, turn 1600bar quietly of the series, but I couldn't get there.
I browsed through both files to compare, 75, and 90, and c'? a bit different, that in the 75 ? set to 775, and in the 90 to 900, it seems to me...Tried to edit, you can climb for a moment the pressure, and then turn off the machine for damage....
Ah, the bit ? the first map rail...
but if you look at annex l of the schemata map 3d, I found two possible limiter
also a rail pressure in the clear 1460 bar ... maybe there are addresses
the first map I think I also is rail...the other I do not know:(
the pressure limiter rail max and right.raising the bit moves to the limitation;)Quote:
Originally Written by faberecu