help audi a3 edc16u34 that you do not write

Hello guys ..and already the.second time that I can't write my car audi a3 2.0 tdi edc16u34 *608_913... *I have purchased the car at which he had been made a luca stanca and I have just read with mpps excluded *egr *and tried to write but it comes at the end of the writing and do not close the program remains stuck at 49% writing and under where it comes out the written alarm ecu *exits written download *not accepted ..and at that point, since the program and blocked I have to disconnect everything and rewrite the file that was first in recovery *mode**wonder if someone èggià *happened and how can I fix that thanks...I have to say that the egr was excluded properly and there is no error on file ..what I think to be inexperienced and who has previously written the.ecu has put some block writing ..if that were so, as the release ? Thanks again

you have changed something in the car like the stereo???

Hi Charles ... no, in the car, and all original ..and with vag there are no errors in any unit

Me happened yesterday on a Golf 5 105cv EDC16U34 already mapped ways to break the flywheel and diesel fuel liquid from the discharge,
I read I write 100% error of closure,
rewrite his mod goes well ok..
I wear this to look for errors my file nothing,
known that Titanium does not corrects the Checksum automatically but would have had to make the tool "Baa" the fix manually,
rewrite all ok closed the day with success :)
(Mpps-V12-In-Box (Aluminum) not the one from 4,70 And...

Thanks for the straight cinqueturbo now I try to correct the check and ritento writing and you upgrade !

Guys, I corrected the check with winlos and private to write ..now to write it all the way to 100% and closes well the writing, however, is not part and remain all the lights are on as you are writing and to get it to restart takes only that file ..what can I do ?

Quote:

---

Originally Written by alessio105

Guys, I corrected the check with winlos and private to write ..now to write it all the way to 100% and closes well the writing, however, is not part and remain all the lights are on as you are writing and to get it to restart takes only that file ..what can I do ?

---

Not that you have Mpps that plastic true?
which protocol are you using Kline or Kline Can?

Yes the cable and all plastic, but with this Cable I have written 50 times on a golf always edc16u34 and many other car no problem ... the protocol to use to his audi a3 2.0 tdi edc16u34 ...is not that someone would have the file ori 608/913?

check the end of the file where ec cks, if you have a part all to zero very likely that the problem is with them, he finds his gold and fill that part on your own and write it down, you'll see that it's all to a good end, you do not say it because then you can't download the file.

sorry but instead of killing being the ecu so why not read and write in bdm, no?