council map 147 1.9 jtd 115

Hi to all.
I'm trying to edit the map of my alfa 147 to make it more powerful bass,so would like to have more shooting without compromising any mechanical part and electronics, and without excluding the egr.In short, a map and soft.For editing, I took inspiration from a bit of news aprese on the forums, and from a map downloaded from a 156 with the same engine as mine,which, compared to the original has been changed.
I look forward to advice
I'll post the map of the 156 from which I took inspiration, and I would be delighted if you give me an opinion on this.
and finally put my original and the modified.

the files posted are: 335_436.ori (the one downloaded from the 156 that seems to be modified)
alfa 147 gold medals (the original map of my 147)
147 s 156 mod (map 147 as amended)
thanks

I hope you are joking, have you copied the maps directly on your own , but do not match, you have the 2D views of your mod.?
then let it be that of the 156 that is changed but it's not okay, parts from your and change it, but first you have to understand what you do and how you do it.

I agree with ugoboss.............if you want we can make it

Quote:

---

Originally Written by ugoboss

I hope you are joking, have you copied the maps directly on your own , but do not match, you have the 2D views of your mod.?
then let it be that of the 156 that is changed but it's not okay, parts from your and change it, but first you have to understand what you do and how you do it.

---

Good evening and thanks for the interest.
I would not have been wrong when I attached the file, because I did the test by copying the increments from one map to the other., but I had to post it because I'm going to be having a little sense. I rebuilt taking its cue always from that of the 156.After riverifico, in the case I would not go very well, I will start from scratch from my original.what do you advise me? Start with the map key to understand something?

is mr.shadow starts from scratch with YOUR file,start the map with the main and go ahead and if you don't ask.............. mail hw sw

Quote:

---

Originally Written by frenk85

is mr.shadow starts from scratch with YOUR file,start the map with the main and go ahead and if you don't ask.............. mail hw sw

---

hi
the map data downloaded are:

hd:0281010332
sw:1037351962

I tried to change only maps main

-map the flue gas injection parzializato

-enrichment in acceleration

-limiter copy

place the mod file,let me know

Quote:

---

Originally Written by Mr. Shadow

hi
the map data downloaded are:

hd:0281010332
sw:1037351962

I tried to change only maps main

-map the flue gas injection parzializato

-enrichment in acceleration

-limiter copy

place the mod file,let me know

---

I have compiled in a table; I'm trying to understand in 2d; when selecting, for example, injection,2d I open a chart ,the address that you read below should be inherent to the map choice? what I represent abscissa and ordinate? as I have to work to better optimize? it is not easy to understand ;
For example this is a map in tabular
what is the significance? as I have to change?
in tabellere increento as a function of load and engine rpm,but in 2d?

I didn't explain very well,I worked in a grid,but then by checking it in 2d is not at all clear

the one circled is not the torque limiter,the ldc is where is the arrow that the grid is right.parts by opening the 2d and the first map is the egr (the council) chiudila you have less clogging and more air "fresh" I close my "linearizzandola".

I did not understand what you want from the green circle?
in the 2D map you recognise it by the blue arrow...