encoding injectors with multiecuscan

Hello.on my alfa 147 ,I have mounted a ecu clone of my machine,the part, and vabene just can not make the adjustment codes injectors with multiecuscan+elm327.there is a particular procedure ?I copy the codes that are on my injectors, but within the parameters I have always A. PS= I saw that the diagnosis of me" adjustment replacement ecu and injectors" what's it for?however, the codes that saw multiecuscan with my ecu are different from those printed on the injectors.can you help me?PS=I have been told that serves the cable kkl, but that is not for the volkswagen?

ELM327 with multiecuscan not ? used to store the classification injectors.
news had it directly from the manufacturer to multiecscan.
to make it you need a different hardware, the ext file.

It is possible to use the ELM327 with other software ?

I think that with a normal autocom do it safely! however, to encode the injectors with the multiecuscan it takes the CanTieCar and not simply the elm327.

with elm327 is imposible! I have he same issue with fiat JTD... I try several instalations of multiecuscan but at the end nothing.

Finally I used autocom...

Quote:

---

Originally Written by sergiot

ELM327 with multiecuscan not ? used to store the classification injectors.
news had it directly from the manufacturer to multiecscan.
to make it you need a different hardware, the ext file.

---

I with my them I only do that to each injector, you have to turn off and return to the diag to store it and do the next..

have you learnt a way to get out of it, that's good to know

Quote:

---

Originally Written by sergiot

have you learnt a way to get out of it, that's good to know

---

Yes and no..
Texa and Delphi will do the same procedure that will guide you through the procedure..
Ditto for reset oil degradation s? someone gave you trouble..