The 3rd training course rimappature professionalchiptuning 16-17/05/14 Catania
3? Training course mapping units professionalchiptuning.
guys as the title the professionalchiptuning organizes the 3? course,we decided to organize a training course of 2 days in both theory and practice in sicily this time since many of our employees are not wanted to come to rome, our capital, and have asked us to do it in our land. the professionalchiptuning and is now present on the market in the field of reprogramming ecus,delete, dpf/fap,egr delete,delete dtc,solution start hot vag group,courses,support, and more for about 10 years.
copy of the program below:
THE COURSE OF REMAPPING (PROFESSIONALCHIPTUNING) WITH A DURATION OF 2 DAYS THEORY + PRACTICE +2 LUNCHES + FREE SMALL GADGET + CERTIFICATE OF PARTICIPATION + POSSIBILITY? ASSISTANCE AND EQUIPMENT.
http://imagizer.imageshack.us/v2/640...0/853/r1q2.jpg
THE COURSE OF REMAPPING:
THE COURSE OF REMAPPING THE DURATION OF 2 DAYS THAT HAS NO LIMITS ON THE TIME TO EXPIRATION,LIMITS OF INTERRUPTION FOR ANY DOUBTS AND QUESTIONS WILL GIVE YOU? FINALLY, THE POSSIBILITY? STARTING TO EDIT A FILE STARTING FROM?THE ORIGINAL READ BY THE MACHINE WITH L?APPROPRIATE EQUIPMENT.YOU GOT IT IN TWO DAYS, WE GUARANTEE THAT YOU WILL BE TRAINED TO 100% TO DO ALL THAT UNTIL THE DAY BEFORE IT WAS TABOO? ACQUIRING YEARS OF EXPERIENCE IN THE FIELD.
-1? DAY (THEORY):
IN THE COURSE YOU WILL BE? EXPLAINED EVERYTHING THE OPERATION AND USE OF THE SOFTWARE AND PROCESSING IS THE MOST IMPORTANT THING IS THAT? HOW,WHERE, AND WHY TO EDIT THE FILE, AND ROUGHLY WHAT ARE THE ADDRESSES AND THEN THE MAPS THAT THE SOFTWARE WILL INDICATE AND INTERPRET SOME OF THE REAL VALUES,ALSO THERE WILL BE? EXPLAINED HOW TO ACT IN CASE OF CAR WITH AUTOMATIC TRANSMISSION,A CAR WITH DPF,HOW TO SOLVE ANY PROBLEMS OF THE VARIOUS FAILURES AND HOW TO MOVE FROM STEP ACCORDING TO A POSSIBLE UPGRADE, AND WILL BE? ALSO EXPLAINED WHAT AND? THE CHECKSUM AND HOW TO CHECK THAT IS CALCULATED IN THE CORRECT MANNER, WHICH IS ESSENTIAL FOR THE RESTART OF THE VEHICLE AFTER THE CHANGE. DURING THE COURSE WE WILL EXAMINE THE MANAGEMENT BOSCH EDC15,EDC16,EDC17,1.3 MJET COMMON RAIL AND THE INJECTOR PUMP.IN THE COURSE WILL BE? EXPLAINED BOTH THE CHANGE IN MODE? TABLE (REAL VALUES) AND THE EDIT MODE? GRAPHICS (2D). AT THE END OF THE COURSE AFTER YOU HAVE COMPLETED THE LESSON AND TOOK ALL THE?THE NOTES OF THE CASE, AS WE WILL HELP YOU TO WRITE APART FROM HAVING IN THE MEANTIME SEEN THE DIFFERENCES? BETWEEN EDC15-EDC16-EDC17,MARELLI 1.3 MJET,COMMON RAIL AND THE INJECTOR PUMP THAT ARE THE CAR, THE MOST POPULAR IN CIRCULATION, BE YOURSELF AND YOU DO A REMAPPING STARTING FROM?THE ORIGINAL, WHICH AT THE END WILL BE? ANALYZED AND POSSIBLY DISCUSSED WITH YOU TO UNDERSTAND IF THERE WERE ERRORS,ALSO it WILL be EXPLAINED HOW to EXCLUDE THE EGR VALVE IS ON the OLD MANAGEMENT EDC15 IN both TABULAR and ON NEW MANAGEMENT EDC16-EDC17 IN 2D WITHOUT The USE OF any OTHER SW THAT OFTEN HURT SUCH a JOB AND HOW to SOLVE THE PROBLEM OF the RESUMPTION, IN the HEAT OF the VAG GROUP.
-2? DAY (PRACTICE):
AFTER YOU HAVE FINISHED THE THEORY,WRITTEN ALL ARE COMPLETELY NOTES NEEDED WE GO TO PRACTICE WHERE YOU WILL BE? SHOWN HOW TO INHIBIT THE?ANTITUNING OF THE MODERN ECU BOSCH EDC17 WITH THIS PROTECTION,YOU WILL? WITH THE PRACTICAL DEMONSTRATION ON HOW TO OPEN THE ECU ON THE BENCH WITHOUT DAMAGING THEM, AND YOU WILL SEE ALL THE VARIOUS TECHNIQUES OF WORKING WITH VARIOUS TOOLS TYPE BDM,TRICORE AND BOOT,AND FINALLY FARA? A READ-MODIFY-WRITE ON A CAR TO COMPLETING THE WHOLE THING,OF COURSE THERE WILL BE? MORE OF A TECHNICIAN READY TO ANSWER YOUR QUESTIONS OR CONCERNS AT YOUR DISPOSAL.
-PROCESSING SOFTWARE:
WITH THE PROCESSING SOFTWARE, YOU CAN REMAP A FILE OF ANY VEHICLE LIKE CAR,MOTORCYCLE,TRUCK,TRACTOR OR VESSEL THAT IS COMPATIBLE WITH IT,THE SOFTWARE WILL PROVIDE YOU WITH? ALL POTENTIAL ADDRESSES THAT YOU CAN YOURSELF GO TO MODIFIARE TO YOUR LIKING AND DEPENDING ON WHAT AND HOW YOU WANT TO GET THE TYPE:
TURBO PRESSURE,LIMITERS,TORQUE,INJECTION,RAIL PRESSURE,ADVANCES,EGR VALVE,REV LIMITERS,SPEED LIMITERS ETC .THE SOFTWARE ONCE YOU HAVE FINISHED EDITING THE FILE DURING THE SAVE OF THE SAME WILL CALCULATE? AUTOMATICALLY THE CHECKSUM THAT SERVES TO START THE VEHICLE CHANGED ONCE REWROTE THE FILE. WITH THIS SOFTWARE YOU CAN EDIT THE FILE AT YOUR LEISURE IN THE MODE? 3D,TABULAR AND 2D, AND THEN RE-CALIBRATE ALL THE PARAMETERS IMPROVING L?DELIVERY IN?THE ARC OF ALL THE RPM .
http://imagizer.imageshack.us/v2/800...0/571/pskq.jpg
POSSIBILITY? FOR ANY PROBLEMS OF INEXPERIENCE OR CONCERNS OF THE FIRST PERIOD OF ACTIVITY? A TECHNICAL APPOINTMENT WILL BE? DIRECTLY IN YOUR WORKSHOP AND IT WILL LEAD YOU? THE PERFORMANCE OF ALL OF THE PRE-AND POST-MAPPING IN DIFFERENT PARTS OF THE D?ITALY.
FOR THOSE WHO WANT TO PARTICIPATE PLEASE SEND A ***** WITH NICKNAME AND CELL NUMBER,WE ALL REMEMBER HOW IT WAS WITH THE 1? And 2? THE COURSE THAT THIS WILL BE A LIMITED NUMBER OF BRIDGES TO ENSURE THE QUALITY OF THE SAME.
FOR INFO YOU CAN CONTACT US AT :
*****: INFO*PROFESSIONALCHIPTUNING.NET
http://imagizer.imageshack.us/v2/800...0/856/0z22.jpg
