Printable View
hello,I just happened?"
to me now with a scania with ems s8. read protocol edc 16
it is the first truck 24v, which I read with obd.
I write the file name,clico save,part of the read ends, but the file ..arosta'?
the strange thing is that is a first reading,then does another and ends.
in total, about 2 minutes.
in the photo from the time it is only for the ' data controller'
[IMG]http://i60.tinypic*****/34xgsuc.jpg[/IMG]
hello raziel is happening to me that I can not finish reading lately with my cock 84 for? in the end, I d? a file not found error, me ? success on the s6 of the scania 500 560 and 620, and I noticed that all those who do not read have software number greater than 2000000, since your file has n? software superior to that figure, I can speculate that they have adopted some antituning, I hope that you will join in this discussion someone that knows more?
hello I with the v53 I have also read the s7 reading time 40min without any problem
but now that I look fine the scrin that you posted your not ? the v 53 why? missing the window which indicates whether to use the mini gender or standard
hello alien, I apologize to all of why? I'm taking advantage of the open discussion by raziel but I wanted to ask you if you can read a few more ecu scania s6 or s7 of recent vehicles that have software number greater than 2000000 as I read s 7 in about 27 minutes, but when the number of the software exceeds that figure, I d? error and I would like to understand if ? my cock or are there protections,I enclose a photo of a read operation is performed on a scania r 480 without errors and with errors, the errors I was wrong choice of driver, but I assure you that with n? software under 2000000 has read the same)
this ? the id of the scania r360 that I have read
EMS S7 DC1306 L01
VLUR6X20009146005
1909402
Scania
200911
093200366
2060724
121022
1536829
2085601
2085598
2085619
in fact, you can also read the sw more than that number, if you happen to? at hand some r 500 , 560 or 620 and you want to let me know how v? thank you in advance, hello.
some just happen to me I'll let you know.
hello,
*alien78 and' 53 the window ,is not seen because the moment I shoot .
the ecu data list 's8'.
cannot read it a problem for sure with the protocol of the 48 even when I had the ori 49 had those problems on those ecu