Hello all, has anyone ever eliminated the limitation of a ecu for a golf 5 2.0 tdi 140 cv of 2003? The ecu limits at 4000 rpm. I have said that you have to read the ecu bdm why? the limitation ? in the e2p. I confirm? Thank you all in advance.
Printable View
Hello all, has anyone ever eliminated the limitation of a ecu for a golf 5 2.0 tdi 140 cv of 2003? The ecu limits at 4000 rpm. I have said that you have to read the ecu bdm why? the limitation ? in the e2p. I confirm? Thank you all in advance.
I do not think that the rev limiter is in the eeprom.
according to me ? as for the leon, if any ? discussed in this thread: http://www.professionalchiptuning.ne...giri-seat-leon
the golf v 2.0 tdi 140cv has no limiter at 4000 rpm and pulls over 5000 rpm, mapped,if anything, your problem may be a speed limit that is actually located in the eeprom.
Then, both the torque limiter, the enrichment and acceleration have been raised, and quite a bit, but nothing the car is limited to 4000. On another golf 2005 a friend with the same ecu, always 140 hp, but with different soft and hard is not happening. It was also modified the speed limiter? but nothing, stops at 4000 rpm, do not really want. Around the net it says that this model ecu has a "vag rev limiter" contained in the e2p and then you can? delete only with bdm. Thanks for the help.
Anyone ? ever have this problem? Aiutooooo!!!!
There is no way to read it in the bdm?
As you have changed the speed limit?
This weekend I have the chance? to be read in bdm. For the limiter of speed? I changed in the flash read with the serial, as soon as you can place the mod.
in fact, to begin with, you need to post ori and mod and start a moment to see how it's made to give you some advice.Quote:
Originally Written by saivivere
http://www.mediafire*****/?4bsvcdbnvqja9lv
here is the link of file ori + mod golf limited to 4000 rpm. Thanks in advance for the help