Guys but when you install a module, you have a program to adjust it?
Printable View
Guys but when you install a module, you have a program to adjust it?
those little cost nn have no sw x the adjustment, the only acts or trimmer, or in the button..the other thing, however, those good bill that provided you also give the sw type, those of the motorcycle.Quote:
Originally Written by angelolsp
I have one fully adjustable, acts both on rail and on the map, and you can also load the maps of your choice via the usb jack you can increase the values in real time ? a bell' issue fun and profitable, of course a map ? better, but at the ****s performance the difference ? little
understand..already the ones with the button that you attaccao when you want? have the sw to program then?
yes, but mine has the remote control 3-button, off, off key, increase rail on button 1 and increase rail + turbo on the 2 key, then 2 trimmer to adjust the action and with the appropriate software, you can change the maps to your liking, you basically 2 graphs with the engine rpm in the horizontal and the power of the signal on the vertical ? fun and also the small increments you feel at the moment
If you are talking about the ones that cost less than 100 euro on ebay don't have any software.... Only button to remove them and another on the body to change the"maps" internal,usually from 1 to 10...Quote:
Originally Written by angelolsp
I had spent 350 euro at the time including everything even an outlet to power it by battery to map it to the tour
and these here 100 euros increments...?? visible
I leave them lose, according to me, 100 euros are pochini and ? better not to risk, the function of the module ? "fool" the signal is making to believe to the ecu that the pressures are pi? low they really are and, therefore, the control unit of the lift up bringing them to a ****llo the upper and qu? you have the performance increase
S i knew ke deceived the centraline...su a punto jtd with a form without a button always attacked by 150 euro and woke up to a machine that also hosts took 10 km/h 200 does them now