File conversion from 2 mb magpro to gallo 2 fgtech 1mb

Hi guys,
I would like to write my modified map with the cock 2,
only that tells me the size is not correct why? the file ? 2mb
to write with mag pro.

My car ? a audi a4 140 8v 2007,
I tried to use the cut/paste of the ecm
and set the last block manually to 0FFFFF the file
generated actually in the size of 1 mb for?
while the original file is read with the Ecm information:

Bosch
1037382430
------------------------------
Cks: 85A6
Size: 2097152 = 0x200000



That cut me from "Info not found".


? evil cut? Can I write it anyway?

What's wrong?

Thanks

read and write with the same tool

You're right legendaryslave,
but ahim? the ecu is giving me an error reading from the serial port the map I have ? that and I wanted to use it,
trying to write if no I have to disassemble it for the bdm.

Then, however, I wanted to figure out how to do it if feasible.

Thanks

Quote:

---

Originally Written by legendaryslave

read and write with the same tool

---

but you have selected the correct driver?

that ecu ? u1-u34 having the file 2 mega're likely ? a u34, not to write the file cut to a mega you can block try to do a reading with another tool

in fact, if ? 2mb does it say that ? a u34 but it seems strange to me that the gallo2 does not have the driver, according to me he has the wrong driver

I forgot to say that I did passat 3c and golf5 with the same ecu and upload the file to 2mb with gallo2

Quote:

---

Originally Written by giuseppe1374

I forgot to say that I did passat 3c and golf5 with the same ecu and upload the file to 2mb with gallo2

---

now ? later there was the piantamento of the ecu

tourist diy? no alpitur? these these have!